Immutable NixOS dotfiles.

Built for Life, Liberty, and the Open Road.

  • 100% Immutable
  • 100% Declarative
  • 100% Reproducible

Introduction

This is my personal configuration for GNU/Linux systems. It enables a consistent experience and computing environment across all of my machines. This project is written with GNU/Emacs, leveraging its capabilities for Literate Programming, a technique where programs are written in a natural language, such as English, interspersed with snippets of code to describe a software project.

This file is controlled by /etc/dotfiles/README.org

Getting Started

  1. Download the latest version of NixOS
  2. Partition your drives and mount the file system
  3. Clone the project git clone git@git.chrishayward.xyz:chris/dotfiles /mnt/etc/dotfiles
  4. Load the default shell nix develop /mnt/etc/dotfiles
  5. Install the system sudo nixos-install --impure --flake /mnt/etc/dotfiles#nixos
  6. Reboot, login and start a graphical system startx

Making Changes

The nixos-rebuild command updates the system so that it corresponds to the configuration specified in the module. It builds the new system in /nix/store/, runs the activation scripts, and restarts and system services (if needed). The command has one required argument, which specifies the desired operation:

Command Description
boot Build the new configuration and make it the boot default, without activation
test Build and activate the new configuration, without adding it to the boot menu
switch Build and activate the new configuration, making it the new boot default
build Build the new configuration, without activation, nor adding it to the boot menu
build-vm Build a script that starts a virtual machine with the desired configuration

After making changes to the configuration the switch command will build and activate a new configuration.

# Build and activate a new configuration.
sudo nixos-rebuild switch --flake $FLAKE#$HOSTNAME

Instead of building a new configuration, it’s possible to rollback to a previous generation using the nixos-rebuild command, by supplying the --rollback argument.

# Rollback to the previous generation.
sudo nixos-rebuild switch --rollback

Docker Container

It’s possible to use parts of this configuration using a Docker container. By default, sandboxing is turned off inside of the container, even though it’s enabled in new installations. This can lead to differences between derivations built inside containers, versus those built without any containerization. This is especially true if a derivation relies on sandboxing to block sideloading of dependencies.

Install from the command line: docker pull ghcr.io/chayward1/dotfiles:main

# This file is controlled by /etc/dotfiles/README.org

# Derive from the official image.
FROM nixos/nix

# Setup the default environment.
WORKDIR /etc/dotfiles
COPY . .

# Load the default system shell.
RUN nix-shell /etc/dotfiles/shell.nix

Operating System

NixOS is a purely functional Linux distribution built on top of the Nix Package Manager. It uses a declarative configuration language to define entire computer systems, and allows reliable system upgrades and rollbacks. NixOS also has tool dedicated to DevOps and deployment tasks, and makes it trivial to share development environments.

# This file is controlled by /etc/dotfiles/README.org
{
  description = "Immutable NixOS dotfiles.";

  inputs = {
    nixpkgs.url = "nixpkgs/nixos-unstable";
    nixpkgs-unstable.url = "nixpkgs/master";
    flake-utils.url = "github:numtide/flake-utils";
    home-manager.url = "github:nix-community/home-manager";
    home-manager.inputs.nixpkgs.follows = "nixpkgs";
    emacs-overlay.url = "github:nix-community/emacs-overlay";
    nixos-hardware.url = "github:nixos/nixos-hardware";
  };

  outputs = inputs @ { self, nixpkgs, nixpkgs-unstable, ... }: {
    nixosConfigurations = {
      nixos = nixpkgs.lib.nixosSystem {
        system = "x86_64-linux";
        specialArgs = { inherit inputs; };
        modules = [
          ./hosts/nixos
          ./modules/x11.nix
          ./modules/ssh.nix
          ./modules/hugo.nix
          ./modules/godot.nix
          ./modules/flakes.nix
          ./modules/cachix.nix
          ./modules/firefox.nix
          inputs.home-manager.nixosModules.home-manager {
            home-manager.useGlobalPkgs = true;
            home-manager.useUserPackages = true;
            home-manager.users.chris = {
              imports = [
                ./modules/git.nix
                ./modules/gpg.nix
                ./modules/vim.nix
                ./modules/gtk.nix
                ./modules/emacs.nix
              ];
            };
          }
        ];
      };
    };
  } //
    inputs.flake-utils.lib.eachDefaultSystem (system:
      let
        pkgs = inputs.nixpkgs.legacyPackages.${system};
      in
        rec {
          devShells = {
            default = import ./shell.nix { inherit pkgs; };
            cc = import ./shells/cc.nix { inherit pkgs; };
            go = import ./shells/go.nix { inherit pkgs; };
            dart = import ./shells/dart.nix { inherit pkgs; };
            grpc = import ./shells/grpc.nix { inherit pkgs; };
            java = import ./shells/java.nix { inherit pkgs; };
            node = import ./shells/node.nix { inherit pkgs; };
            python = import ./shells/python.nix { inherit pkgs; };
            rust = import ./shells/rust.nix { inherit pkgs; };
          };
        }
    );
}

Nixpkgs

Nixpkgs is a collection of over 60,000 software packages that can be installed with the Nix Package Manager. Two main branches are offered:

  1. The current stable release
  2. The Unstable branch following the latest development

nixpkgs.url = "nixpkgs/nixos-unstable";
nixpkgs-unstable.url = "nixpkgs/master";

Flake Utils

Flake Utils is a collection of pure Nix functions that don’t depend on Nixpkgs, and that are useful in the context of writing other Nix Flakes.

flake-utils.url = "github:numtide/flake-utils";

Home Manager

Home Manager provides a basic system for managing user environments using the Nix Package Manager together with the Nix libraries found in Nixpkgs. It allows declarative configuration of user specific (non-global) packages and files.

home-manager.url = "github:nix-community/home-manager";
home-manager.inputs.nixpkgs.follows = "nixpkgs";

Emacs Overlay

Adding the Emacs Overlay extends the GNU/Emacs package set to contain the latest versions, and daily generations from popular package sources, including the needed dependencies to run Emacs as a Window Manager.

emacs-overlay.url = "github:nix-community/emacs-overlay";

NixOS Hardware

NixOS Hardware is a collection of NixOS modules covering specific hardware quirks. Unlike the channel, this will update the git repository on a rebuild. However, it’s easy to pin particular revisions for more stability.

nixos-hardware.url = "github:nixos/nixos-hardware";

Development Shells

The command nix develop will run a bash shell that provides the build environment of a derivation. It’s an experimental replacement for the nix-shell command that is compliant with Nix Flakes. It provides an interactive build environment nearly identical to what Nix would use to build installable. Inside this shell, environment variables and shell functions are set up so that you can interactively and incrementally build your package(s).

inputs.flake-utils.lib.eachDefaultSystem (system:
  let
    pkgs = inputs.nixpkgs.legacyPackages.${system};
  in
    rec {
      devShells = {
        default = import ./shell.nix { inherit pkgs; };
        cc = import ./shells/cc.nix { inherit pkgs; };
        go = import ./shells/go.nix { inherit pkgs; };
        dart = import ./shells/dart.nix { inherit pkgs; };
        grpc = import ./shells/grpc.nix { inherit pkgs; };
        java = import ./shells/java.nix { inherit pkgs; };
        node = import ./shells/node.nix { inherit pkgs; };
        python = import ./shells/python.nix { inherit pkgs; };
        rust = import ./shells/rust.nix { inherit pkgs; };
      };
    }
);

Nix

This shell adds a version of the nix command that is pre-configured to support Flakes. Flakes are the unit for packaging Nix code in a reproducible and discoverable way. They can have dependencies on other flakes, making it possible to have multi-repository Nix projects. A flake is a filesystem tree that contains a file named flake.nix. It specifies some metadata about the flake such as dependencies (inputs), as well as the values such as packages or modules (outputs).

Import this shell with nix develop $DOTFILES

# This file is controlled by /etc/dotfiles/README.org
{ pkgs ? import <nixpkgs> { } }:

with pkgs;

let
  myNix = writeShellScriptBin "nix" ''
    exec ${nixFlakes}/bin/nix --option experimental-features "nix-command flakes" "$@"
  '';

in mkShell {
  buildInputs = [
    git
    myNix
  ];
  shellHook = ''
    export DOTFILES="$(pwd)"
  '';
}

Go

package main

import "fmt"

func main() {
	fmt.Println("Hello, world!")
}

Go is an open-source programming language that makes it easy to build simple, reliable, and efficient software. It’s statically typed and compiled programming language. It’s syntactically similar to C, but with memory safety, garbage collection, structural typing, and CSP-style concurrency.

Import this shell with nix develop $DOTFILES#go

# This file is controlled by /etc/dotfiles/README.org
{ pkgs ? import <nixpkgs> { } }:

with pkgs;
mkShell {
  buildInputs = [
    go
    gopls
    protoc-gen-go
    protoc-gen-go-grpc
  ];
  shellHook = ''
    export GO111MODULE=on
    export GOPATH=$XDG_DATA_HOME/go
    export PATH=$GOPATH/bin:$PATH
  '';
}

Dart

Dart is a programming language designed for client development, such as for the web and mobile apps. It is developed by Google and can be used to build server and desktop applications. It is an object-oriented, class-based, garbage-collected language with C-style syntax.

Import this shell with nix develop $DOTFILES#dart

#This file is controlled by /etc/dotfiles/README.org
{ pkgs ? import <nixpkgs> { } }:

with pkgs;
mkShell {
  buildInputs = [
    dart
    flutter
  ];
  shellHook = ''
    FLUTTER_SDK_DIR=${flutter}/bin/cache/dart-sdk/
  '';
}

Rust

fn main() {
    println!("Hello, world!");
}

Rust is a multi-paradigm programming language designed for performance and safety, especially safe concurrency. It is syntactically similar to C++, but can garantee memory safety by using a borrow checker to validate references. Rust achieves memory safety without garbage collection, and reference counting is optional.

Import this shell with nix develop $DOTFILES#rust

# This file is controlled by /etc/dotfiles/README.org
{ pkgs ? import <nixpkgs> { } }:

with pkgs;
mkShell {
  buildInputs = [
    rustup
  ];
  shellHook = ''
    export RUSTUP_HOME="$XDG_DATA_HOME/rustup"
    export CARGO_HOME="$XDG_DATA_HOME/cargo"
    export PATH="$CARGO_HOME/bin:$PATH"
  '';
}

Node

var http = require('http');

http.createServer((req, res) => {
    res.WriteHead(200, { 'Content-Type': 'text/html' });
    res.end('Hello, world!');
});

NodeJS is an open-source, cross-platform, back-end JavaScript runtime environment that runs on the V8 engine, and executes JavaScript code outside of a web browser. NodeJS lets developers user JavaScript to write command line tools, and for server-side scripting to produce dynamic web page content.

Import this shell with nix develop $DOTFILES#node

# This file is controlled by /etc/dotfiles/README.org
{ pkgs ? import <nixpkgs> { } }:

with pkgs;
mkShell {
  buildInputs = [
    nodejs
    yarn
  ];
  shellHook = ''
    export NPM_CONFIG_TMP="$XDG_RUNTIME_DIR/npm"
    export NPM_CONFIG_CACHE="$XDG_CACHE_HOME/npm"
    export NPM_CACHE_PREFIX="$XDG_CACHE_HOME/npm"
    export PATH="$(yarn global bin):$PATH"
  '';
}

Java

class Program {
    public static void main(String[] args) {
	    System.out.println("Hello, world!");
	}
}

OpenJDK is a free and open-source implementation of the Java Platform, Standard Edition. It is the result of an effort Sun Microsystems began in 2006. The implementation is licensed under the GNU General Public License Version 2 with a linking exception.

Import this shell with nix develop $DOTFILES#java

# This file is controlled by /etc/dotfiles/README.org
{ pkgs ? import <nixpkgs> { } }:

with pkgs;
mkShell {
  buildInputs = [
    jre8
    jdk8
  ];
  shellHook = ''
  '';
}

gRPC

service Greeter {
  rpc SayHello (HelloRequest) returns (HelloResponse);
}

message HelloRequest { string name = 1; }
message HelloResponse { string response = 1; }

gRPC is a modern open-source, high-performance Remote Procedure Call (RPC) framework that can run in any environment. It can efficiently connect services in and across data centres with pluggable support for load balancing, tracing, health checking, and authentication.

Import this shell with nix develop $DOTFILES#grpc

# This file is controlled by /etc/dotfiles/README.org
{ pkgs ? import <nixpkgs> { } }:

with pkgs;
mkShell {
  buildInputs = [
    grpc
    grpcui
    grpcurl
    grpc-tools
  ];
  shellHook = ''
  '';
}

C/C++

#include <iostream>

int main() {
  std::cout << "Hello, world!\n";
  return 0;
}

C is a general-purpose, procedural computer programming language support structured programming, lexical variable scope, and recursion. It has a static type system, and by design provides constructs that map efficiently to typical machine instructions. C++ is a general-purpose programming language created as an extension of the C programming language.

Import this shell with nix develop $DOTFILES#cc

# This file is controlled by /etc/dotfiles/README.org
{ pkgs ? import <nixpkgs> { } }:

with pkgs;
mkShell {
  buildInputs = [
    gdb
    ccls
    cmake
    boost
    gnumake
    gcc-unwrapped
  ];
  shellHook = ''
  '';
}

Python

print("Hello, world!")

Python is an interpreted high-level, general-purpose programming language. Its design philosophy emphasizes code readability, with its notable use of significant indentation. Its language constructs, as well as its object-oriented approach aim to help programmers write clear, logical, code for small and large projects.

Import this shell with nix develop $DOTFILES#python

# This file is controlled by /etc/dotfiles/README.org
{ pkgs ? import <nixpkgs> { } }:

with pkgs;
mkShell {
  buildInputs = [
    python310Packages.pip
    python310Packages.pip-tools
    # python310Packages.python-lsp-black    #TODO: Marked broken.
    # python310Packages.python-lsp-server   #TODO: Marked broken.
    # python310Packages.python-lsp-jsonrpc  #TODO: Marked broken.
  ];
  shellHook = ''
  '';
}

Host Configurations

NixOS typically stores the current machine configuration in /etc/nixos/configuration.nix. In this project, this file is stored in /etc/dotfiles/hosts/$HOSTNAME/..., and imported, along with the generated hardware configurations. This ensures that multiple host machines can share the same modules, and generating new host definitions is trivial.

nixosConfigurations = {
  nixos = nixpkgs.lib.nixosSystem {
    system = "x86_64-linux";
    specialArgs = { inherit inputs; };
    modules = [
      ./hosts/nixos
      ./modules/x11.nix
      ./modules/ssh.nix
      ./modules/hugo.nix
      ./modules/godot.nix
      ./modules/flakes.nix
      ./modules/cachix.nix
      ./modules/firefox.nix
      inputs.home-manager.nixosModules.home-manager {
        home-manager.useGlobalPkgs = true;
        home-manager.useUserPackages = true;
        home-manager.users.chris = {
          imports = [
            ./modules/git.nix
            ./modules/gpg.nix
            ./modules/vim.nix
            ./modules/gtk.nix
            ./modules/emacs.nix
          ];
        };
      }
    ];
  };
};

Shared

NixOS makes it easier to share common configurations amongst all of the hosts, such as with pre-configured wireless networking:

networking.wireless.networks = {
  MyWiFi_5C1870 = {
    priority = 2;
    pskRaw = "409b3c85fef1c5737f284d2f82f20dc6023e41804e862d4fa26265ef8193b326";
  };
  SM-G975W3034 = {
    priority = 1;
    pskRaw = "74835d96a98ca2c56ffe4eaf92223f8a555168b59ec2bb22b1e46b2a333adc80";
  };
};

It’s helpful to add the machine hostnames to the networking configuration, so I can refer to another host across the network by name. Some devices that can have more than one IP (WIFI / Ethernet) will have the wireless hostname suffixed:

networking.hosts = {
  # "192.168.3.105" = [ "gamingpc" ];
  # "192.168.3.163" = [ "acernitro" ];
  # "192.168.3.182" = [ "raspberry" ];
  # "192.168.3.183" = [ "homecloud" ];
};

Setting up new machines, especially headless ones like the Raspberry Pi Zero, can be difficult with NixOS. I find it easier to setup automatic network configuration, and wait for the machine to appear on the network. This is complimented with a pre-authorized SSH key, making it simple to connect and complete the installation headlessly.

users.users.chris.openssh.authorizedKeys.keys = [
  "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIO4wka/LfG3pto15DIm9LIRbb6rWr7/ipCRiCdAKSlY4 chris@chrishayward.xyz"
];

Default

The default host, built using QEMU, a free and open-source emulator that can perform hardware virtualization. It features a lightweight system optimized for development, running GNU/Emacs + EXWM as the graphical environment.

nixos = nixpkgs.lib.nixosSystem {
  system = "x86_64-linux";
  specialArgs = { inherit inputs; };
  modules = [
    ./hosts/nixos
    ./modules/x11.nix
    ./modules/ssh.nix
    ./modules/hugo.nix
    ./modules/godot.nix
    ./modules/flakes.nix
    ./modules/cachix.nix
    ./modules/firefox.nix
    inputs.home-manager.nixosModules.home-manager {
      home-manager.useGlobalPkgs = true;
      home-manager.useUserPackages = true;
      home-manager.users.chris = {
        imports = [
          ./modules/git.nix
          ./modules/gpg.nix
          ./modules/vim.nix
          ./modules/gtk.nix
          ./modules/emacs.nix
        ];
      };
    }
  ];
};

Deploy this configuration with nixos-rebuild switch --flake /etc/dotfiles/#nixos.

# This file is controlled by /etc/dotfiles/README.org
{ ... }:

{
  imports = [
    ./configuration.nix
    ./hardware.nix
  ];
}

Configuration

This is a basic default configuration that specified the indended default configuration of the system. Because NixOS has a declarative configuration model, you can create or edit a description of the desired configuration, and update it from one file.

# This file is controlled by /etc/dotfiles/README.org
{ config, pkgs, inputs, ... }:

{
  time.timeZone = "America/Toronto";

  networking.hostName = "nixos";
  networking.useDHCP = false;
  networking.firewall.enable = false;
  networking.interfaces.ens3.useDHCP = true;

  networking.hosts = {
    # "192.168.3.105" = [ "gamingpc" ];
    # "192.168.3.163" = [ "acernitro" ];
    # "192.168.3.182" = [ "raspberry" ];
    # "192.168.3.183" = [ "homecloud" ];
  };
  users.users.chris.openssh.authorizedKeys.keys = [
    "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIO4wka/LfG3pto15DIm9LIRbb6rWr7/ipCRiCdAKSlY4 chris@chrishayward.xyz"
  ];

  programs.mtr.enable = true;
  programs.fish.enable = true;
  programs.gnupg.agent.enable = true;

  users.users.chris = {
    shell = pkgs.fish;
    isNormalUser = true;
    extraGroups = [ "wheel" ];
  };
}

Hardware

The file system for this host is a single 24GB QCOW file, a format for disk images used by QEMU. The file can be recreated easily by following the steps listed in the NixOS installation manual, specifically the section on disk formatting.

# This file is controlled by /etc/dotfiles/README.org
{ config, lib, pkgs, modulesPath, ... }:

{
  imports =
    [ (modulesPath + "/profiles/qemu-guest.nix")
    ];

  boot.initrd.availableKernelModules = [ "ata_piix" "floppy" "sd_mod" "sr_mod" ];
  boot.initrd.kernelModules = [ ];
  boot.kernelModules = [ ];
  boot.extraModulePackages = [ ];

  boot.loader.grub.enable = true;
  boot.loader.grub.version = 2;
  boot.loader.grub.device = "/dev/sda";

  fileSystems."/" =
    { device = "/dev/disk/by-label/nixos";
      fsType = "ext4";
    };

  swapDevices =
    [ { device = "/dev/disk/by-label/swap"; }
    ];
}

Module Definitions

Modules are files combined by NixOS to produce the full system configuration. Modules wre introduced to allow extending NixOS without modifying its source code. They also allow splitting up configuration.nix, making the system configuration easier to maintain and use.

X11

./modules/x11.nix

X11, or X is the generic name for the X Window System Display Server. All graphical GNU/Linux applications connect to an X-Window (or Wayland) to display graphical data on the monitor of a computer. Its a program that acts as the interface between graphical applications and the graphics subsystem of the computer.

# This file is controlled by /etc/dotfiles/README.org
{ config, pkgs, ... }:

{
  services.xserver.enable = true;
  services.xserver.layout = "us";
  services.xserver.libinput.enable = true;
  services.xserver.displayManager.startx.enable = true;

  environment = {
    variables = {
      XDG_DESKTOP_DIR = "$HOME/";
      XDG_CACHE_HOME = "$HOME/.cache";
      XDG_CONFIG_HOME = "$HOME/.config";
      XDG_DATA_HOME = "$HOME/.local/share";
      XDG_BIN_HOME = "$HOME/.local/bin";
    };
    systemPackages = with pkgs; [
      pkgs.sqlite
      pkgs.pfetch
      pkgs.cmatrix
      pkgs.asciiquarium
    ];
    extraInit = ''
      export XAUTHORITY=/tmp/Xauthority
      export xserverauthfile=/tmp/xserverauth
      [ -e ~/.Xauthority ] && mv -f ~/.Xauthority "$XAUTHORITY"
      [ -e ~/.serverauth.* ] && mv -f ~/.serverauth.* "$xserverauthfile"
    '';
  };

  services.picom.enable = true;
  services.printing.enable = true;

  fonts.fonts = with pkgs; [
    iosevka-bin
    emacs-all-the-icons-fonts
  ];
}

SSH

./modules/ssh.nix

OpenSSH is a suite of secure networking utilities based on the Secure Shell Protocol, which provides a secure channel over an unsecured network in a client-server architecture. OpenSSH started as a fork of the free SSH program; later versions were proprietary software.

Apply some configuration to the default settings:

  • Disable logging in as root
  • Disable password authentication
# This file is controlled by /etc/dotfiles/README.org
{ config, pkgs, ... }:

{
  services.openssh = {
    enable = true;
    permitRootLogin = "no";
    passwordAuthentication = false;
  };
}

Hugo

./modules/hugo.nix

Hugo is one of the most popular open-source static site generators. I use it to build https://chrishayward.xyz which is included in a later section of this configuration. This module adds a custom package to push the site to the server.

# This file is controlled by /etc/dotfiles/README.org
{ config, pkgs, ... }:

let
  mySiteDir = "/etc/dotfiles/docs/public/";
  mySiteTgt = "ubuntu@chrishayward.xyz:/var/www/chrishayward";
  mySiteBuild = pkgs.writeShellScriptBin "site-build" ''
    pushd ${mySiteDir}../ > /dev/null &&
    ${pkgs.hugo}/bin/hugo -v ;
    popd > /dev/null
  '';
  mySiteUpdate = pkgs.writeShellScriptBin "site-update" ''
    ${pkgs.rsync}/bin/rsync -aP ${mySiteDir} ${mySiteTgt}
  '';

in {
  environment.systemPackages = [
    pkgs.hugo
    mySiteBuild
    mySiteUpdate
  ];
}

Godot

./modules/godot.nix

Godot is a cross-platform, free and open-source game engine released under the MIT license. It provides a huge set of common tools, so you can focus on making your game without reinventing the wheel. It’s completely free and open-source, no strings attached, no royalties. The game belongs to the creator down to each line of the engine code.

# This file is controlled by /etc/dotfiles/README.org
{ config, pkgs, ... }:

{
  environment.systemPackages = [
    pkgs.tiled
    pkgs.godot
    pkgs.godot-server
    pkgs.godot-headless
    pkgs.python310Packages.gdtoolkit
  ];
}

Flakes

./modules/flakes.nix

Nix Flakes are an upcoming feature of the Nix Package Manager. They allow you to specify your codes dependencies in a declarative way, simply by listing them inside of a flake.nix file. Each dependency is then pinned to a specific git-hash. Flakes replace the nix-channels command and things like builtins.fetchGit, keeping dependencies at the top of the tree, and channels always in sync. Currently, Flakes are not available unless explicitly enabled.

# This file is controlled by /etc/dotfiles/README.org
{ config, pkgs, inputs, ... }:

{
  nix = {
    package = pkgs.nixUnstable;
    extraOptions = ''
      experimental-features = nix-command flakes
    '';
  };

  nixpkgs = {
    config = { allowUnfree = true; };
    overlays = [ inputs.emacs-overlay.overlay ];
  };
}

Cachix

./modules/cachix.nix

Cachix is a Command line client for Nix binary cache hosting. This allows downloading and usage of pre-compiled binaries for applications on nearly every available system architecture. This speeds up the time it takes to rebuild configurations.

# This file is controlled by /etc/dotfiles/README.org
{ config, ... }:

{
  nix = {
    settings = {
      substituters = [
        "https://nix-community.cachix.org"
      ];
      trusted-public-keys = [
        "nix-community.cachix.org-1:mB9FSh9qf2dCimDSUo8Zy7bkq5CX+/rkCWyvRCYg3Fs="
      ];
    };
  };
}

Docker

./modules/docker.nix

Docker is a set of platform as a service tools that use OS level virtualization to deliver software in packages called containers. Containers are isolated from one another and bundle their own software, libraries, and configuration files; they can communicate with each other through well-defined channels.

# This file is controlled by /etc/dotfiles/README.org
{ config, pkgs, ... }:

{
  # Enable the docker virutalization platform.
  virtualisation.docker = {
    enable = true;
    enableOnBoot = true;
    autoPrune.enable = true;
  };

  # Required for the `docker' command.
  users.users.chris.extraGroups = [ "docker" ];

  # Add docker extensions.
  environment.systemPackages = [
    pkgs.docker-compose
    pkgs.docker-machine
  ];
}

Firefox

./modules/firefox.nix

Firefox Browser, also known as Mozilla Firefox or simply Firefox, is a free and open-source web browser developed by the Mozilla Foundation and its subsidiary, the Mozilla Corporation. Firefox uses the Gecko layout engine to render web pages, which implements current and anticipated web standards. In 2017, Firefox began incorporating new technology under the code name Quantum to promote parallelism and a more intuitive user interface.

# This file is controlled by /etc/dotfiles/README.org
{ config, pkgs, ... }:

let
  myFirefox = pkgs.writeShellScriptBin "firefox" ''
    HOME=~/.local/share/mozilla ${pkgs.firefox-bin}/bin/firefox
  '';

in {
  # NOTE: Use the binary until module is developed.
  environment.systemPackages = [
    myFirefox
  ];
}

Home Manager

Home Manager includes a flake.nix file for compatibility with Nix Flakes, a feature utilized heavily in this project. When using flakes, switching to a new configuration is done only for the entire system, using the command nixos-rebuild switch --flake <path>, instead of nixos-rebuild, and home-manager seperately.

inputs.home-manager.nixosModules.home-manager {
  home-manager.useGlobalPkgs = true;
  home-manager.useUserPackages = true;
  home-manager.users.chris = {
    imports = [
      ./modules/git.nix
      ./modules/gpg.nix
      ./modules/vim.nix
      ./modules/gtk.nix
      ./modules/emacs.nix
    ];
  };
}

Certain modules have to be included within home manager or they will not function correctly.

This module MUST be included within home manager

Git

./modules/git.nix

Git is a free and open source distributed version control system designed to handle everything from small to very large projects with speed and efficiency. Git is easy to learn, has a tiny footprint, and lighting fast performance. It outclasses every other version control tool such as: SCM, Subversion, CVS, ClearCase, with features like cheap local branching, convinient staging areas, and multiple workflows.

# This file is controlled by /etc/dotfiles/README.org
# This module MUST be included within home manager
{ pkgs, ... }:

let
  # Fix any corruptions in the local copy.
  myGitFix = pkgs.writeShellScriptBin "git-fix" ''
    if [ -d .git/objects/ ]; then
      find .git/objects/ -type f -empty | xargs rm -f
      git fetch -p
      git fsck --full
    fi
    exit 1
  '';

in {
  home.packages = [ myGitFix ];

  programs.git = {
    enable = true;
    userName = "Christopher James Hayward";
    userEmail = "chris@chrishayward.xyz";

    signing = {
      key = "37AB1CB72B741E478CA026D43025DCBD46F81C0F";
      signByDefault = true;
    };
  };
}

Gpg

./modules/gpg.nix

GNU Privacy Guard is a free-software replacement for Symantec’s PGP cryptographic software suite. It is compliant with RFC 4880, the IETF standards-track specification of OpenPGP. Modern versions of PGP are interoperable with GnuPG and other OpenPGP-compliant systems.

# This file is controlled by /etc/dotfiles/README.org
# This module MUST be included within home manager
{ pkgs, ... }:

{
  services.gpg-agent = {
    enable = true;
    defaultCacheTtl = 1800;
    enableSshSupport = true;
    pinentryFlavor = "gtk2";
  };
}

Vim

./modules/vim.nix

Neovim is a project that seeks to aggressively refactor Vim in order to:

  • Simplify maintenance and encourage contributions
  • Split the work between multiple developers
  • Enable advanced UIs without core modification
  • Maximize extensibility
# This file is controlled by /etc/dotfiles/README.org
# This module MUST be included within home manager
{ pkgs, ... }:

{
  programs.neovim = {
    enable = true;
    viAlias = true;
    vimAlias = true;
    vimdiffAlias = true;
    extraConfig = ''
      set number relativenumber
      set nobackup
    '';
    extraPackages = [
      pkgs.nixfmt
    ];
    plugins = with pkgs.vimPlugins; [
      vim-nix
      vim-airline
      vim-polyglot
    ];
  };
}

GTK

./modules/gtk.nix

GTK is a free and open-source, cross-platform widget toolkit for graphical user interfaces. It’s one of the most popular toolkits for the Wayland and X11 windowing systems.

# This file is controlled by /etc/dotfiles/README.org
# This module MUST be included within home manager
{ pkgs, ... }:

{
  home.packages = [
    pkgs.nordic
    pkgs.arc-icon-theme
    pkgs.lxappearance
  ];

  home.file.".gtkrc-2.0" = {
    text = ''
      gtk-theme-name="Nordic-darker"
      gtk-icon-theme-name="Arc"
      gtk-font-name="Iosevka 11"
      gtk-cursor-theme-size=0
      gtk-toolbar-style=GTK_TOOLBAR_BOTH_HORIZ
      gtk-toolbar-icon-size=GTK_ICON_SIZE_LARGE_TOOLBAR
      gtk-button-images=0
      gtk-menu-images=0
      gtk-enable-event-sounds=1
      gtk-enable-input-feedback-sounds=1
      gtk-xft-antialias=1
      gtk-xft-hinting=1
      gtk-xft-hintstyle="hintmedium"
    '';
  };

  home.file.".config/gtk-2.0/gtkfilechooser.ini" = {
    text = ''
      [Filechooser Settings]
      LocationMode=path-bar
      ShowHidden=false
      ShowSizeColumn=true
      GeometryX=442
      GeometryY=212
      GeometryWidth=1036
      GeometryHeight=609
      SortColumn=name
      SortOrder=ascending
      StartupMode=recent
    '';
  };

  home.file.".config/gtk-3.0/settings.ini" = {
    text = ''
      [Settings]
      gtk-theme-name=Nordic-darker
      gtk-icon-theme-name=Arc
      gtk-font-name=Iosevka 11
      gtk-cursor-theme-size=0
      gtk-toolbar-style=GTK_TOOLBAR_BOTH_HORIZ
      gtk-toolbar-icon-size=GTK_ICON_SIZE_LARGE_TOOLBAR
      gtk-button-images=0
      gtk-menu-images=0
      gtk-enable-event-sounds=1
      gtk-enable-input-feedback-sounds=1
      gtk-xft-antialias=1
      gtk-xft-hinting=1
      gtk-xft-hintstyle=hintmedium
    '';
  };
}

Emacs Configuration

./modules/emacs.nix

GNU/Emacs is an extensible, customizable, free/libre text editor – and more. At its core is an interpreter for Emacs Lisp, a dialect of the Lisp programming language with extensions to support text editing. Other features include:

  • Highly customizable
  • Full Unicopde support
  • Content-aware editing modes
  • Complete built-in documentation
  • Wide range of functionality beyond text editing
# This file is controlled by /etc/dotfiles/README.org
# This module MUST be included within home manager
{ pkgs, ... }:

let
  myEmacs = pkgs.emacsWithPackagesFromUsePackage {
    config = ../README.org;
    package = pkgs.emacsNativeComp;
    alwaysEnsure = true;
    alwaysTangle = true;
    extraEmacsPackages = epkgs: [
      # Required packages...
      epkgs.exwm
      epkgs.evil
      epkgs.evil-collection
      epkgs.evil-surround
      epkgs.evil-nerd-commenter
      epkgs.general
      epkgs.which-key

      # Optional packages.
      epkgs.org
      epkgs.org-roam
      epkgs.org-roam-ui
      epkgs.websocket
      epkgs.simple-httpd
      epkgs.org-drill
      epkgs.org-pomodoro
      epkgs.writegood-mode
      epkgs.ob-http
      epkgs.ox-hugo
      epkgs.password-store
      epkgs.docker
      epkgs.dockerfile-mode
      epkgs.mu4e-alert
      epkgs.dired-single
      epkgs.all-the-icons
      epkgs.all-the-icons-dired
      epkgs.all-the-icons-ivy-rich
      epkgs.emojify
      epkgs.eshell-prompt-extras
      epkgs.vterm
      epkgs.magit
      epkgs.hydra
      epkgs.elfeed
      epkgs.nix-mode
      epkgs.projectile
      epkgs.lsp-mode
      epkgs.lsp-ui
      epkgs.company
      epkgs.gdscript-mode
      epkgs.ccls
      epkgs.go-mode
      epkgs.dart-mode
      epkgs.lsp-dart
      epkgs.hover
      epkgs.pretty-mode
      epkgs.rustic
      epkgs.protobuf-mode
      epkgs.typescript-mode
      epkgs.plantuml-mode

      # User interface packages.
      epkgs.ivy
      epkgs.counsel
      epkgs.ivy-rich
      epkgs.ivy-posframe
      epkgs.ivy-prescient
      epkgs.desktop-environment
      epkgs.doom-themes
      epkgs.doom-modeline
    ];
  };

in {
  home.packages = [
    pkgs.nitrogen
    pkgs.autorandr
    pkgs.pass
    pkgs.mu
    pkgs.isync
    (pkgs.writeShellScriptBin "mail-init" ''
      ${pkgs.mu} init --maildir="~/.cache/mail" --my-address="chris@chrishayward.xyz"
      ${pkgs.mu} index
    '')
    (pkgs.writeShellScriptBin "mail-sync" ''
      ${pkgs.isync}/bin/mbsync -a
    '')
    pkgs.aspell
    pkgs.aspellDicts.en
    pkgs.aspellDicts.en-science
    pkgs.aspellDicts.en-computers
    # pkgs.texlive.combined.scheme-full
    pkgs.brightnessctl
    pkgs.plantuml
    pkgs.nixfmt
    pkgs.rnix-lsp
    (pkgs.writeShellScriptBin "dotfiles-theme" ''
      ${myEmacs}/bin/emacsclient --no-wait --eval '(json-encode (dotfiles/theme))' | sed "s/\\\\//g" | sed -e 's/^"//' -e 's/"$//'
    '')
  ];

  programs.emacs = {
    enable = true;
    package = myEmacs;
  };

  xsession = {
    enable = true;
    windowManager.command = ''
      ${pkgs.nitrogen}/bin/nitrogen --restore
      ${myEmacs}/bin/emacs --daemon -f exwm-enable
      ${myEmacs}/bin/emacsclient -c
    '';
  };
  home.file.".xinitrc" = {
    text = ''
      exec ./.xsession
    '';
  };
  # Deploy the authinfo file.
  home.file.".authinfo.gpg".source = ../config/authinfo.gpg;

  # Deploy the isync configuration file.
  home.file.".mbsyncrc" = {
    text = ''
      IMAPStore xyz-remote
      Host mail.chrishayward.xyz
      User chris@chrishayward.xyz
      PassCmd "pass chrishayward.xyz/chris"
      SSLType IMAPS

      MaildirStore xyz-local
      Path ~/.cache/mail/
      Inbox ~/.cache/mail/inbox
      SubFolders Verbatim

      Channel xyz
      Far :xyz-remote:
      Near :xyz-local:
      Patterns * !Archives
      Create Both
      Expunge Both
      SyncState *
    '';
  };
}

When Emacs is started, it normally tries to load a Lisp program from an ititialization file, or init file. This file, if it exists, specifies how to initialize and configure Emacs.

;; This file is controlled by /etc/dotfiles/README.org

;; Required inputs.
;; Configure `exwm'.
(setq exwm-workspace-number 5
      exwm-layout-show-all-buffers t
      exwm-worspace-show-all-buffers t)

;; Configure input keys.
(setq exwm-input-prefix-keys
  '(?\M-x
  ?\C-g
  ?\C-\ ))
(setq exwm-input-global-keys
  `(([?\s-r] . exwm-reset)
    ,@(mapcar (lambda (i)
                `(,(kbd (format "s-%d" i)) .
                (lambda ()
                (interactive)
                (exwm-workspace-switch-create ,i))))
                (number-sequence 0 9))))

;; Configure `exwm-randr'.
(require 'exwm-randr)
(exwm-randr-enable)

;; Configure custom hooks.
(setq display-time-day-and-date t)
(add-hook 'exwm-init-hook
  (lambda ()
    (display-battery-mode +1) ;; Display battery info (if available).
    (display-time-mode +1)))  ;; Display the time in the modeline.

;; Setup buffer display names.
(add-hook 'exwm-update-class-hook
  (lambda ()
    (exwm-workspace-rename-buffer exwm-class-name))) ;; Use the system class name.

;; Configure monitor hot-swapping.
(add-hook 'exwm-randr-screen-change-hook
  (lambda ()
    (dotfiles/run-in-background "autorandr --change --force"))) ;; Swap to the next screen config.
;; Enable the Extensible VI Layer for Emacs.
(setq evil-want-integration t   ;; Required for `evil-collection.'
      evil-want-keybinding nil  ;; Same as above.
      evil-want-C-i-jump nil)   ;; Disable jumping in terminal.
(evil-mode +1)

;; Configure `evil-collection'.
(evil-collection-init)

;; Configure `evil-surround'.
(global-evil-surround-mode +1)

;; Configure `evil-nerd-commenter'.
(global-set-key (kbd "M-;") 'evilnc-comment-or-uncomment-lines)

;; Invoke `org-cycle' in normal mode inside of `org-mode' buffers.
(evil-define-key 'normal 'org-mode-map (kbd "<tab>") #'org-cycle)
;; Use <SPC> as a leader key via `general.el'.
(general-create-definer dotfiles/leader
  :keymaps '(normal insert visual emacs)
  :prefix "SPC"
  :global-prefix "C-SPC")

;; Setup general to work with `evil-mode'.
(setq general-evil-setup t)

;; Find files with <SPC> <period> ...
;; Switch buffers with <SPC> <comma> ...
(dotfiles/leader
  "." '(find-file :which-key "File")
  "," '(switch-to-buffer :which-key "Buffer")
  "k" '(kill-buffer :which-key "Kill")
  "c" '(kill-buffer-and-window :which-key "Close"))

;; Add keybindings for executing shell commands.
(dotfiles/leader
  "r" '(:ignore t :which-key "Run")
  "rr" '(dotfiles/run :which-key "Run")
  "ra" '(async-shell-command :which-key "Async"))

;; Add keybindings for quitting Emacs.
(dotfiles/leader
  "q" '(:ignore t :which-key "Quit")
  "qq" '(save-buffers-kill-emacs :which-key "Save")
  "qw" '(kill-emacs :which-key "Now")
  "qf" '(delete-frame :which-key "Frame"))

;; Add keybindings for toggles / tweaks.
(dotfiles/leader
  "t" '(:ignore t :which-key "Toggle / Tweak"))
;; Configure `which-key' to see keyboard bindings in the
;; mini-buffer and when using M-x.
(setq which-key-idle-delay 0.0)
(which-key-mode +1)

;; Optional inputs.
;; Configure `org-mode' source blocks.
(setq org-src-fontify-natively t      ;; Make source blocks prettier.
      org-src-tab-acts-natively t     ;; Use TAB indents within source blocks.
      org-hide-emphasis-markers t     ;; Don't show emphasis markup.
      org-src-preserve-indentation t  ;; Stop `org-mode' from formatting blocks.
      org-confirm-babel-evaluate nil) ;; Don't ask for confirmation to evaluate blocks.

;; Add an `org-mode-hook'.
(add-hook 'org-mode-hook
  (lambda ()
    (org-indent-mode)
    (visual-line-mode)))

;; Remove the `Validate XHTML 1.0' message from HTML export.
(setq org-export-html-validation-link nil
      org-html-validation-link nil)

;; Configure the keywords in the TODO -> DONE sequence.
(setq org-todo-keywords '((sequence "TODO" "START" "WAIT" "DONE")))

;; Track ids globally.
(setq org-id-track-globally t)

;; Configure `org-babel' languages.
(org-babel-do-load-languages
  'org-babel-load-languages
  '((C . t)))

;; Log / Clock into property drawers.
(setq org-log-into-drawer t
      org-clock-into-drawer t)

;; Encrypt files with the public key.
(setq epa-file-select-keys 2
      epa-file-encrypt-to "37AB1CB72B741E478CA026D43025DCBD46F81C0F"
      epa-cache-passphrase-for-symmetric-encryption t)

;; TODO: Configure default structure templates.
;; (require 'org-tempo)

;; Don't use native image sizes in previews.
(setq org-image-actual-width nil)

;; Apply custom keybindings.
(dotfiles/leader
  "o" '(:ignore t :which-key "Org")
  "oe" '(org-export-dispatch :which-key "Export")
  "ot" '(org-babel-tangle :which-key "Tangle")
  "oi" '(org-toggle-inline-images :which-key "Images")
  "of" '(:ignore t :which-key "Footnotes")
  "ofn" '(org-footnote-normalize :which-key "Normalize"))
;; Setup `org-roam'.
(require 'org-roam)

;; Silence the migration warnings.
(setq org-roam-v2-ack t)

;; Enable `visual-line-mode' in `org-roam' buffer.
(add-hook 'org-roam-mode-hook
	  (lambda ()
	    (visual-line-mode +1)))

;; Enable completion everywhere.
(setq org-roam-completion-everywhere t)

;; Set the roam directories.
(setq org-roam-directory (expand-file-name "/etc/dotfiles")
      org-roam-dailies-directory (concat org-roam-directory "/docs/daily"))

;; Clear the deafult capture templates.
(setq org-roam-capture-templates '()
      org-roam-dailies-capture-templates '())

;; Override the default slug method.
(cl-defmethod org-roam-node-slug ((node org-roam-node))
  (let ((title (org-roam-node-title node))
        (slug-trim-chars '(768 ; U+0300 COMBINING GRAVE ACCENT
                           769 ; U+0301 COMBINING ACUTE ACCENT
                           770 ; U+0302 COMBINING CIRCUMFLEX ACCENT
                           771 ; U+0303 COMBINING TILDE
                           772 ; U+0304 COMBINING MACRON
                           774 ; U+0306 COMBINING BREVE
                           775 ; U+0307 COMBINING DOT ABOVE
                           776 ; U+0308 COMBINING DIAERESIS
                           777 ; U+0309 COMBINING HOOK ABOVE
                           778 ; U+030A COMBINING RING ABOVE
                           780 ; U+030C COMBINING CARON
                           795 ; U+031B COMBINING HORN
                           803 ; U+0323 COMBINING DOT BELOW
                           804 ; U+0324 COMBINING DIAERESIS BELOW
                           805 ; U+0325 COMBINING RING BELOW
                           807 ; U+0327 COMBINING CEDILLA
                           813 ; U+032D COMBINING CIRCUMFLEX ACCENT BELOW
                           814 ; U+032E COMBINING BREVE BELOW
                           816 ; U+0330 COMBINING TILDE BELOW
                           817 ; U+0331 COMBINING MACRON BELOW
                           )))
    (cl-flet* ((nonspacing-mark-p (char)
				  (memq char slug-trim-chars))
	       (strip-nonspacing-marks (s)
				       (ucs-normalize-NFC-string
					(apply #'string (seq-remove #'nonspacing-mark-p
								    (ucs-normalize-NFD-string s)))))
	       (cl-replace (title pair)
			   (replace-regexp-in-string (car pair) (cdr pair) title)))
      (let* ((pairs `(("[^[:alnum:][:digit:]]" . "-")
		      ("--*" . "-")
		      ("^-" . "")
		      ("-$" . "")))
	     (slug (-reduce-from #'cl-replace (strip-nonspacing-marks title) pairs)))
	(downcase slug)))))

;; Configure capture templates.
;; Standard document.
(add-to-list 'org-roam-capture-templates
  '("d" "Default" plain "%?"
    :target (file+head "docs/%<%Y%m%d%H%M%S>-${slug}.org.gpg"
"
#+TITLE: ${title}
#+AUTHOR: Christopher James Hayward
#+EMAIL: chris@chrishayward.xyz
"
)
    :unnarrowed t))

;; Daily notes.
(add-to-list 'org-roam-dailies-capture-templates
  '("d" "Default" entry "* %?"
    :target (file+head "%<%Y-%m-%d>.org.gpg"
"
#+TITLE: %<%Y-%m-%d>
#+AUTHOR: Christopher James Hayward
#+EMAIL: chris@chrishayward.xyz
")))

;; Apply custom keybindings.
(dotfiles/leader
  "or"  '(:ignore t :which-key "Roam")
  "ori" '(org-roam-node-insert :which-key "Insert")
  "orf" '(org-roam-node-find :which-key "Find")
  "orc" '(org-roam-capture :which-key "Capture")
  "org" '(org-id-get-create :which-key "Get/Create")
  "orb" '(org-roam-buffer-toggle :which-key "Buffer"))

;; Apply custom keybindings for dailies.
(dotfiles/leader
  "ord" '(:ignore t :which-key "Dailies")
  "ordd" '(org-roam-dailies-goto-date :which-key "Date")
  "ordt" '(org-roam-dailies-goto-today :which-key "Today")
  "ordm" '(org-roam-dailies-goto-tomorrow :which-key "Tomorrow")
  "ordy" '(org-roam-dailies-goto-yesterday :which-key "Yesterday"))

;; Run the setup command.
(org-roam-setup)
;; HACK: Set up `org-roam-ui'.
;; (add-to-list 'load-path "~/.local/source/org-roam-ui")
(load-library "org-roam-ui")

;; Configure `org-roam-ui'.
(setq org-roam-ui-follow t
      org-roam-ui-sync-theme t
      org-roam-ui-open-on-start t
      org-roam-ui-update-on-save t
      org-roam-ui-browser-function #'browse-url-firefox)

;; Configure keybindings.
(dotfiles/leader
  "oru" '(:ignore t :which-key "UI")
  "oruu" '(org-roam-ui-mode :which-key "Toggle UI")
  "orut" '(org-roam-ui-sync-theme :which-key "Sync Theme"))
;; Exclude :drill: items from `org-roam'.
(setq org-roam-db-node-include-function
  (defun dotfiles/org-roam-include ()
    (not (member "drill" (org-get-tags)))))

;; Configure keybindings for `org-drill'.
(dotfiles/leader
  "od" '(:ignore t :which-key "Drill")
  "odd" '(org-drill :which-key "Drill")
  "odc" '(org-drill-cram :which-key "Cram")
  "odr" '(org-drill-resume :which-key "Resume"))
;; Configure `org-agenda' to use the project files.
(setq org-agenda-files '("/etc/dotfiles/"
                         "/etc/dotfiles/docs/"
                         "/etc/dotfiles/docs/daily/"))

;; Include files encrypted with `gpg'.
(require 'org)
(unless (string-match-p "\\.gpg" org-agenda-file-regexp)
  (setq org-agenda-file-regexp
    (replace-regexp-in-string "\\\\\\.org" "\\\\.org\\\\(\\\\.gpg\\\\)?"
                              org-agenda-file-regexp)))

;; Open an agenda buffer with SPC o a.
(dotfiles/leader
  "oa" '(org-agenda :which-key "Agenda"))
;; Configure `org-pomodor' with the overtime workflow.
(setq org-pomodoro-manual-break t
      org-pomodoro-keep-killed-time t)

;; Configure keybindings.
(dotfiles/leader
  "op" '(org-pomodoro :which-key "Pomodoro"))
;; Configure `writegood-mode'.
(dotfiles/leader
  "tg" '(writegood-mode :which-key "Grammar"))
;; Use `aspell' as a drop-in replacement for `ispell'.
(setq ispell-program-name "aspell"
      ispell-eextra-args '("--sug-mode=fast"))

;; Configure the built-in `flyspell-mode'.
(dotfiles/leader
  "ts" '(flyspell-mode :which-key "Spelling"))
;; Set `eww' as the default browser.
(setq browse-url-browser-function 'eww-browse-url)

;; Configure the `shr' rendering engine.
(setq shr-use-fonts nil
      shr-use-colors nil)
;; Required to setup `ob-http'.
(org-babel-do-load-languages
  'org-babel-load-languages
  '((http . t)))
;; Configure `ox-hugo' as an `org-mode-export' backend.
(require 'ox-hugo)

;; Set up the base directory.
(setq org-hugo-base-dir (expand-file-name "/etc/dotfiles/docs"))

;; Capture templates.
;; Shared content
;; (add-to-list 'org-roam-capture-templates
;;   '("p" "Post" plain "%?"
;;     :target (file+head "docs/posts/${slug}.org.gpg"
;; "
;; ,#+TITLE: ${title}
;; ,#+AUTHOR: Christopher James Hayward
;; ,#+DATE: %<%Y-%m-%d>

;; ,#+EXPORT_FILE_NAME: ${slug}
;; ,#+OPTIONS: num:nil todo:nil tasks:nil

;; ,#+ROAM_KEY: https://chrishayward.xyz/posts/${slug}/

;; ,#+HUGO_BASE_DIR: ../
;; ,#+HUGO_AUTO_SET_LASTMOD: t
;; ,#+HUGO_SECTION: posts
;; ,#+HUGO_DRAFT: true
;; "
;; )
;;     :unnarrowed t))
;; Set the path to the password store.
(setq password-store-dir (expand-file-name "~/.password-store"))

;; Apply custom keybindings.
(dotfiles/leader
  "p" '(:ignore t :which-key "Passwords")
  "pp" '(password-store-copy :which-key "Copy")
  "pe" '(password-store-edit :which-key "Edit")
  "pi" '(password-store-insert :which-key "Insert")
  "pr" '(password-store-rename :which-key "Rename")
  "pg" '(password-store-generate :which-key "Generate"))
;; Apply custom keybindings.
(dotfiles/leader
  "n" '(:ignore t :which-key "Containers")
  "nd" '(docker :which-key "Docker"))
;; Configure `erc'.
(setq erc-autojoin-channels-alist '(("irc.libera.chat" "#emacs" "#nixos" "#org-mode" "#systemcrafters"))
      erc-track-exclude-types '("JOIN" "NICK" "QUIT" "MODE")
      erc-lurker-hide-list '("JOIN" "PART" "QUIT"))

;; Configure `erc-fill-column'.
(add-hook 'window-configuration-change-hook
  '(lambda ()
     (setq erc-fill-column (- (window-width) 12))))

;; Connect to IRC via `erc'.
(defun dotfiles/erc-connect ()
  "Connected to IRC via `erc'."
  (interactive)
  (erc-tls :server "irc.libera.chat"
           :port 6697
           :nick "megaphone"
           :password (password-store-get "libera.chat/megaphone")
           :full-name "Chris Hayward"))

;; Configure keybindings.
(dotfiles/leader
  "i" '(dotfiles/erc-connect :which-key "Chat"))
;; Add the `mu4e' shipped with `mu' to the load path.
(add-to-list 'load-path "/etc/profiles/per-user/chris/share/emacs/site-lisp/mu4e/")
(require 'mu4e)

;; Confiugure `mu4e'.
(setq mu4e-maildir "~/.cache/mail"
      mu4e-update-interval (* 5 60)
      mu4e-get-mail-command "mail-sync"
      mu4e-compose-format-flowed t
      mu4e-change-filenames-when-moving t
      mu4e-compose-signature (concat "Chris Hayward\n"
                                     "chris@chrishayward.xyz"))

;; Sign all outbound email with GPG.
(add-hook 'message-send-hook 'mml-secure-message-sign-pgpmime)
(setq message-send-mail-function 'smtpmail-send-it
      mml-secure-openpgp-signers '("37AB1CB72B741E478CA026D43025DCBD46F81C0F"))

;; Setup `mu4e' accounts.
(setq mu4e-contexts
  (list
    ;; Main
    ;; chris@chrishayward.xyz
    (make-mu4e-context
      :name "Main"
      :match-func
        (lambda (msg)
          (when msg
            (string-prefix-p "/Main" (mu4e-message-field msg :maildir))))
      :vars
        '((user-full-name . "Christopher James Hayward")
          (user-mail-address . "chris@chrishayward.xyz")
          (smtpmail-smtp-server . "mail.chrishayward.xyz")
          (smtpmail-smtp-service . 587)
          (smtpmail-stream-type . starttls)))))

;; Setup `mu4e-alert'.
(setq mu4e-alert-set-default-style 'libnotify)
(mu4e-alert-enable-notifications)
(mu4e-alert-enable-mode-line-display)

;; Open the `mu4e' dashboard.
(dotfiles/leader
  "m" '(mu4e :which-key "Mail"))
;; Include `dired-x' for the `jump' method.
(require 'dired-x)

;; Configure `dired-single' to support `evil' keys.
(evil-collection-define-key 'normal 'dired-mode-map
  "h" 'dired-single-up-directory
  "l" 'dired-single-buffer)

;; Configure keybindings for `dired'.
(dotfiles/leader
  "d" '(dired-jump :which-key "Dired"))
;; Setup `all-the-icons-dired'.
(add-hook 'dired-mode-hook 'all-the-icons-dired-mode)

;; Disable monochrome icons.
(setq all-the-icons-dired-monochrome nil)

;; Display default font ligatures.
(global-prettify-symbols-mode +1)
;; Setup `emojify'.
(add-hook 'after-init-hook 'global-emojify-mode)
;; Configure `eshell'.
(setq eshell-highlight-prompt nil
      eshell-prefer-lisp-functions nil)

;; Configure the lambda prompt.
(autoload 'epe-theme-lambda "eshell-prompt-extras")
(setq eshell-prompt-function 'epe-theme-lambda)

;; Configure keybindings for `eshell'.
(dotfiles/leader
  "e" '(eshell :which-key "EShell"))
;; Add keybindings for interacting with the shell(s).
(dotfiles/leader
  "v" '(vterm :which-key "VTerm"))
;; Add keybindings for working with `magit'.
(dotfiles/leader
  "g" '(:ignore t :which-key "Git")
  "gg" '(magit-status :which-key "Status")
  "gc" '(magit-clone :which-key "Clone")
  "gf" '(magit-fetch :which-key "Fetch")
  "gp" '(magit-pull :which-key "Pull"))
;; Configure the font when running as `emacs-server'.
(custom-set-faces
  '(default ((t (:inherit nil :height 120 :family "Iosevka")))))

;; Define a `hydra' function for scaling the text interactively.
(defhydra hydra-text-scale (:timeout 4)
  "Scale the text in the current buffer."
  ("k" text-scale-decrease "Decrease")
  ("j" text-scale-increase "Increase")
  ("f" nil "Finished" :exit t))

;; Create keybinding for calling the function.
(dotfiles/leader
  "tf" '(hydra-text-scale/body :which-key "Font"))
;; Define a `hydra' function for resizing the current frame.
(defhydra hydra-resize-frame (:timeout 4)
  "Scale the current frame."
  ("h" shrink-window-horizontally "Left")
  ("j" enlarge-window "Down")
  ("k" shrink-window "Up")
  ("l" enlarge-window-horizontally "Right")
  ("f" nil "Finished" :exit t))

;; Add keybindings for working with frames to replace
;; the C-x <num> <num> method of bindings, which is awful.
(dotfiles/leader
  "w" '(:ignore t :which-key "Windows")
  "ww" '(window-swap-states :which-key "Swap")
  "wc" '(delete-window :which-key "Close")
  "wh" '(windmove-left :which-key "Left")
  "wj" '(windmove-down :which-key "Down")
  "wk" '(windmove-up :which-key "Up")
  "wl" '(windmove-right :which-key "Right")
  "ws" '(:ignore t :which-key "Split")
  "wsj" '(split-window-below :which-key "Below")
  "wsl" '(split-window-right :which-key "Right")
  "wr" '(hydra-resize-frame/body :which-key "Resize"))
;; Configure `elfeed'.
(setq elfeed-db-directory (expand-file-name "~/.cache/elfeed"))

;; Add custom feeds for `elfeed' to fetch.
(setq elfeed-feeds (quote
                     (("https://hexdsl.co.uk/rss.xml")
                      ("https://lukesmith.xyz/rss.xml")
                      ("https://friendo.monster/rss.xml")
                      ("https://chrishayward.xyz/index.xml")
                      ("https://protesilaos.com/master.xml"))))

;; Add custom keybindings for `elfeed'.
(dotfiles/leader
  "f" '(:ignore t :which-key "Elfeed")
  "fl" '(elfeed :which-key "Open")
  "fu" '(elfeed-update :which-key "Update"))
;; Configure the `projectile-project-search-path'.
(setq projectile-project-search-path '("~/.local/source"))
(projectile-mode +1)
;; Configure `lsp-mode'.
(setq lsp-idle-delay 0.5
      lsp-prefer-flymake t)

;; Configure `lsp-ui'.
(setq lsp-ui-doc-position 'at-point
      lsp-ui-doc-delay 0.5)

;; Add custom keybindings for `lsp'.
(dotfiles/leader
  "l" '(:ignore t :which-key "LSP")
  "ll" '(lsp :which-key "LSP"))
;; Configure `company-mode'.
(setq company-backend 'company-capf
      lsp-completion-provider :capf)

;; Enable it globally.
(global-company-mode +1)
(require 'gdscript-mode)

;; Silence lsp warnings for gdscript.
(defun lsp--gdscript-ignore-errors (original-function &rest args)
  "Ignore the error message resulting from Godot not replying to the `JSONRPC' request."
  (if (string-equal major-mode "gdscript-mode")
      (let ((json-data (nth 0 args)))
	(if (and (string= (gethash "jsonrpc" json-data "") "2.0")
		 (not (gethash "id" json-data nil))
		 (not (gethash "method" json-data nil)))
	    nil; (message "Method not found")
	  (apply original-function args)))
    (apply original-function args)))

;; Run the function around `lsp--get-message-type' to suppress warnings.
(advice-add #'lsp--get-message-type :around #'lsp--gdscript-ignore-errors)

;; Add custom keybinds.
(dotfiles/leader
  "lg" '(gdscript-hydra-show :which-key "GDScript"))
;; Configure `go-mode' to work with `lsp-mode'.
(defun dotfiles/go-hook ()
  (add-hook 'before-save-hook #'lsp-format-buffer t t)
  (add-hook 'before-save-hook #'lsp-organize-imports t t))

;; Configure a custom `before-save-hook'.
(add-hook 'go-mode-hook #'dotfiles/go-hook)
;; Configure `dart-mode' to work with `lsp-mode'.
(add-hook 'dart-mode-hook 'lsp)

;; Help Emacs find Flutter packages.
(setq lsp-dart-sdk-dir (getenv "$FLUTTER_SDK_DIR"))
;; Configure `pretty-mode' to work with `python-mode'.
(add-hook 'python-mode-hook
  (lambda ()
    (turn-on-pretty-mode)))
;; Configure `rustic' with `lsp-mode'.
(setq rustic-format-on-save t
      rustic-lsp-server 'rls)
;; Configure `plantuml-mode'.
(add-to-list 'org-src-lang-modes '("plantuml" . plantuml))
(org-babel-do-load-languages 'org-babel-load-languages '((plantuml . t)))
(setq plantuml-default-exec-mode 'executable
      org-plantuml-exec-mode 'plantuml)
;; Configure `desktop-environment'.
(require 'desktop-environment)
(desktop-environment-mode +1)

;; User interface.
;; Configure `ivy'.
(setq counsel-linux-app-format-function
  #'counsel-linux-app-format-function-name-only)
(ivy-mode +1)
(counsel-mode +1)

;; Configure `ivy-rich'.
(ivy-rich-mode +1)

;; Configure `ivy-posframe'.
(setq ivy-posframe-parameters '((parent-frame nil))
      ivy-posframe-display-functions-alist '((t . ivy-posframe-display)))
(ivy-posframe-mode +1)

;; Configure `ivy-prescient'.
(setq ivy-prescient-enable-filtering nil)
(ivy-prescient-mode +1)
;; Configure the default frame transparency.
(set-frame-parameter (selected-frame) 'alpha '(95 . 95))
(add-to-list 'default-frame-alist '(alpha . (95 . 95)))
;; Include modern themes from `doom-themes'.
(setq doom-themes-enable-bold t
      doom-themes-enable-italic t)

;; Load the `doom-nord' and `doom-nord-light' themes.
;; (load-theme 'doom-nord-light t)
(load-theme 'doom-nord t)

;; Define a method for returning information about the current theme.
;; This is based off the function `org-roam-ui-get-theme'.
(defun dotfiles/theme ()
  "Return information about the current theme."
  (list `(bg . ,(face-background hl-line-face))
        `(bg-alt . ,(face-background 'default))
        `(fg . ,(face-foreground 'default))
        `(fg-alt . ,(face-foreground font-lock-comment-face))
        `(red . ,(face-foreground 'error))
        `(orange . ,(face-foreground 'warning))
        `(yellow . ,(face-foreground font-lock-builtin-face))
        `(green . ,(face-foreground 'success))
        `(cyan . ,(face-foreground font-lock-constant-face))
        `(blue . ,(face-foreground font-lock-keyword-face))
        `(violet . ,(face-foreground font-lock-constant-face))
        `(magenta . ,(face-foreground font-lock-preprocessor-face))))

;; Load a new theme with <SPC> t t.
(dotfiles/leader
  "tt" '(counsel-load-theme :which-key "Theme"))
;; Configure `doom-modeline'.
(require 'doom-modeline)
(setq doom-modeline-height 16
      doom-modeline-icon t)

;; Launch after initialization.
(add-hook 'after-init-hook 'doom-modeline-mode)

;; Define a modeline segment to show the workspace information.
(doom-modeline-def-segment dotfiles/workspaces
  (exwm-workspace--update-switch-history)
  (concat
   (doom-modeline-spc)
   (elt (let* ((num (exwm-workspace--count))
               (sequence (number-sequence 0 (1- num)))
               (not-empty (make-vector num nil)))
	  (dolist (i exwm--id-buffer-alist)
            (with-current-buffer (cdr i)
              (when exwm--frame
		(setf (aref not-empty
                            (exwm-workspace--position exwm--frame))
                      t))))
	  (mapcar
           (lambda (i)
             (mapconcat
              (lambda (j)
		(format (if (= i j) "[%s]" " %s ")
			(propertize
			 (apply exwm-workspace-index-map (list j))
			 'face
			 (cond ((frame-parameter (elt exwm-workspace--list j)
						 'exwm-urgency)
				'(:inherit warning :weight bold))
                               ((= i j) '(:inherit underline :weight bold))
                               ((aref not-empty j) '(:inherit success :weight bold))
                               (t `((:foreground ,(face-foreground 'mode-line-inactive))))))))
              sequence ""))
           sequence))
	(exwm-workspace--position (selected-frame)))))

;; Define a custom modeline to override the default.
(doom-modeline-def-modeline 'dotfiles/modeline
  '(bar workspace-name dotfiles/workspaces window-number modals matches buffer-info remote-host buffer-position word-count parrot selection-info)
  '(objed-state misc-info persp-name battery grip irc mu4e gnus github debug repl lsp minor-modes input-method indent-info buffer-encoding major-mode process vcs checker))

;; Define a method to load the modeline.
(defun dotfiles/load-modeline ()
  "Load the default modeline."
  (doom-modeline-set-modeline 'dotfiles/modeline 'default))

;; Enable `doom-modeline'.
(add-hook 'doom-modeline-mode-hook 'dotfiles/load-modeline)
(doom-modeline-mode +1)
(doom-modeline-set-modeline 'dotfiles/modeline 'default)

It’s somtimes desirable to have customization that takes effect during Emacs startup earlier than the normal init file. Place these configurations in ~/.emacs.d/early-init.el. Most customizations should be put in the normal init file ~/.emacs.d/init.el.

;; This file is controlled by /etc/dotfiles/README.org
;; Disable unwanted UI elements.
(tooltip-mode -1)
(menu-bar-mode -1)
(tool-bar-mode -1)
(scroll-bar-mode -1)

;; Fix the scrolling behaviour.
(setq scroll-conservatively 101)

;; Fix mouse-wheel scrolling behaviour.
(setq mouse-wheel-follow-mouse t
      mouse-wheel-progressive-speed t
      mouse-wheel-scroll-amount '(3 ((shift) . 3)))

;; Start in fullscreen/maximized.
(add-to-list 'default-frame-alist '(fullscreen . maximized))
;; Silence warnings from packages that don't support `native-comp'.
(setq comp-async-report-warnings-errors nil         ;; Emacs 27.2 ...
      native-comp-async-report-warnings-errors nil) ;; Emacs 28+  ...
;; Disable unwanted features.
(setq make-backup-files nil
      create-lockfiles nil)
;; Define a method to run an external process.
(defun dotfiles/run (cmd)
  "Run an external process."
  (interactive (list (read-shell-command "λ ")))
  (start-process-shell-command cmd nil cmd))

;; Define a method to run a background process.
(defun dotfiles/run-in-background (cmd)
  (let ((command-parts (split-string cmd "[ ]+")))
    (apply #'call-process `(,(car command-parts) nil 0 nil ,@(cdr command-parts)))))
;; Use 'y' and 'n' instead of 'yes' and 'no'.
(defalias 'yes-or-no-p 'y-or-n-p)

Native Comp

pkgs.emacsNativeComp;

Native Comp, also known as GccEmacs, refers to the --with-native-compilation configuration option when building GNU/Emacs. It adds support for compiling Emacs Lisp to native code using libgccjit. All of the Emacs Lisp packages shipped with Emacs are native-compiled, providing a noticable performance iomprovement out-of-the-box.

;; Silence warnings from packages that don't support `native-comp'.
(setq comp-async-report-warnings-errors nil         ;; Emacs 27.2 ...
      native-comp-async-report-warnings-errors nil) ;; Emacs 28+  ...

Disable UI

Emacs has been around since the 1980s, and it’s painfully obvious when you’re greeted with the default user interface. Disable some unwanted features to clean it up, and bring the appearance to something closer to a modern editor.

;; Disable unwanted UI elements.
(tooltip-mode -1)
(menu-bar-mode -1)
(tool-bar-mode -1)
(scroll-bar-mode -1)

;; Fix the scrolling behaviour.
(setq scroll-conservatively 101)

;; Fix mouse-wheel scrolling behaviour.
(setq mouse-wheel-follow-mouse t
      mouse-wheel-progressive-speed t
      mouse-wheel-scroll-amount '(3 ((shift) . 3)))

;; Start in fullscreen/maximized.
(add-to-list 'default-frame-alist '(fullscreen . maximized))

Backup Files

Emacs makes a backup for a file only the first time the file is saved from a buffer. No matter how many times the file is subsequently written to, the backup remains unchanged. For files managed by a version control system, backup files are redundant since the previous versions are already stored.

;; Disable unwanted features.
(setq make-backup-files nil
      create-lockfiles nil)

Shell Commands

Define some methods for interaction between GNU/Emacs, and the systems underyling shell:

  1. Method to run an external process, launching any application on a new process without interference
  2. Method to apply commands to the current call process, effecting the running instance

;; Define a method to run an external process.
(defun dotfiles/run (cmd)
  "Run an external process."
  (interactive (list (read-shell-command "λ ")))
  (start-process-shell-command cmd nil cmd))

;; Define a method to run a background process.
(defun dotfiles/run-in-background (cmd)
  (let ((command-parts (split-string cmd "[ ]+")))
    (apply #'call-process `(,(car command-parts) nil 0 nil ,@(cdr command-parts)))))

Improved prompts

By default Emacs will ask you to enter ‘Yes’ or ‘No’ instead of ‘Y’ or ‘N’. This is a relatively conservative design decision, based on the fact that certain prompts may be important enough to warrant typing three characters.

;; Use 'y' and 'n' instead of 'yes' and 'no'.
(defalias 'yes-or-no-p 'y-or-n-p)

Nix Mode

pkgs.nixfmt
pkgs.rnix-lsp

Nix Mode is an Emacs major mode for editing Nix expressions. This provides basic handling of .nix files. Syntax highlighting and indentation support using SMIE are provided. rnix-lsp is a work-in-progress language server for Nix with syntax checking and basic completion.

epkgs.nix-mode

Evil Mode

Evil Mode is an extensible VI layer for GNU/Emacs. It emulates the main features of Vim, transforming GNU/Emacs into a modal editor.

epkgs.evil
epkgs.evil-collection
epkgs.evil-surround
epkgs.evil-nerd-commenter

The next time Emacs is started, it will come up in normal state, denoted by <N> in the modeline. This is where the main vi bindings are defined. Like Emacs in general, Evil Mode is extensible in Emacs Lisp.

;; Enable the Extensible VI Layer for Emacs.
(setq evil-want-integration t   ;; Required for `evil-collection.'
      evil-want-keybinding nil  ;; Same as above.
      evil-want-C-i-jump nil)   ;; Disable jumping in terminal.
(evil-mode +1)

;; Configure `evil-collection'.
(evil-collection-init)

;; Configure `evil-surround'.
(global-evil-surround-mode +1)

;; Configure `evil-nerd-commenter'.
(global-set-key (kbd "M-;") 'evilnc-comment-or-uncomment-lines)

;; Invoke `org-cycle' in normal mode inside of `org-mode' buffers.
(evil-define-key 'normal 'org-mode-map (kbd "<tab>") #'org-cycle)

EXWM

epkgs.exwm

EXWM (Emacs X Window Manager) is a full-featured tiling X11 window manager for GNU/Emacs built on-top of XELB. It features:

  • Fully keyboard-driven operations
  • Hybrid layout modes (tiling & stacking)
  • Dynamic workspace support
  • ICCM/EWMH compliance

pkgs.nitrogen
pkgs.autorandr

I wanted to leave (exwm-enable) out of my Emacs configuration (which does no harm anyways). This can be called when using the daemon to start EXWM.

xsession = {
  enable = true;
  windowManager.command = ''
    ${pkgs.nitrogen}/bin/nitrogen --restore
    ${myEmacs}/bin/emacs --daemon -f exwm-enable
    ${myEmacs}/bin/emacsclient -c
  '';
};

EXWM cannot make an X window manager by itself, this is by design; You must tell X to do it. Override the ~/.xinitrc file to start the xsession.

home.file.".xinitrc" = {
  text = ''
    exec ./.xsession
  '';
};

;; Configure `exwm'.
(setq exwm-workspace-number 5
      exwm-layout-show-all-buffers t
      exwm-worspace-show-all-buffers t)

;; Configure input keys.
(setq exwm-input-prefix-keys
  '(?\M-x
  ?\C-g
  ?\C-\ ))
(setq exwm-input-global-keys
  `(([?\s-r] . exwm-reset)
    ,@(mapcar (lambda (i)
                `(,(kbd (format "s-%d" i)) .
                (lambda ()
                (interactive)
                (exwm-workspace-switch-create ,i))))
                (number-sequence 0 9))))

;; Configure `exwm-randr'.
(require 'exwm-randr)
(exwm-randr-enable)

;; Configure custom hooks.
(setq display-time-day-and-date t)
(add-hook 'exwm-init-hook
  (lambda ()
    (display-battery-mode +1) ;; Display battery info (if available).
    (display-time-mode +1)))  ;; Display the time in the modeline.

;; Setup buffer display names.
(add-hook 'exwm-update-class-hook
  (lambda ()
    (exwm-workspace-rename-buffer exwm-class-name))) ;; Use the system class name.

;; Configure monitor hot-swapping.
(add-hook 'exwm-randr-screen-change-hook
  (lambda ()
    (dotfiles/run-in-background "autorandr --change --force"))) ;; Swap to the next screen config.

General

epkgs.general

General.el provides a more convenient method for binding keys in Emacs, providing a unified interface for key definitions. Its primary purpose is to build on existing functionality to make key definitions more clear and concise.

;; Use <SPC> as a leader key via `general.el'.
(general-create-definer dotfiles/leader
  :keymaps '(normal insert visual emacs)
  :prefix "SPC"
  :global-prefix "C-SPC")

;; Setup general to work with `evil-mode'.
(setq general-evil-setup t)

;; Find files with <SPC> <period> ...
;; Switch buffers with <SPC> <comma> ...
(dotfiles/leader
  "." '(find-file :which-key "File")
  "," '(switch-to-buffer :which-key "Buffer")
  "k" '(kill-buffer :which-key "Kill")
  "c" '(kill-buffer-and-window :which-key "Close"))

;; Add keybindings for executing shell commands.
(dotfiles/leader
  "r" '(:ignore t :which-key "Run")
  "rr" '(dotfiles/run :which-key "Run")
  "ra" '(async-shell-command :which-key "Async"))

;; Add keybindings for quitting Emacs.
(dotfiles/leader
  "q" '(:ignore t :which-key "Quit")
  "qq" '(save-buffers-kill-emacs :which-key "Save")
  "qw" '(kill-emacs :which-key "Now")
  "qf" '(delete-frame :which-key "Frame"))

;; Add keybindings for toggles / tweaks.
(dotfiles/leader
  "t" '(:ignore t :which-key "Toggle / Tweak"))

Which Key

Which Key is an Emacs minor mode that displays the key bindings following your currently entered incomplete command (prefix) in a popup or mini-buffer.

epkgs.which-key

;; Configure `which-key' to see keyboard bindings in the
;; mini-buffer and when using M-x.
(setq which-key-idle-delay 0.0)
(which-key-mode +1)

EWW

Emacs Web Wowser (EWW) is a Web browser written in Emacs Lisp based on the shr.el library. It’s my primary browser when it comes to text-based browsing.

  • Use eww as the default browser
  • Don’t use any special fonts or colours

;; Set `eww' as the default browser.
(setq browse-url-browser-function 'eww-browse-url)

;; Configure the `shr' rendering engine.
(setq shr-use-fonts nil
      shr-use-colors nil)

ERC

ERC is a powerful, modular, and extensible IRC client for GNU/Emacs. It’s part of the GNU project, and included in Emacs.

;; Configure `erc'.
(setq erc-autojoin-channels-alist '(("irc.libera.chat" "#emacs" "#nixos" "#org-mode" "#systemcrafters"))
      erc-track-exclude-types '("JOIN" "NICK" "QUIT" "MODE")
      erc-lurker-hide-list '("JOIN" "PART" "QUIT"))

;; Configure `erc-fill-column'.
(add-hook 'window-configuration-change-hook
  '(lambda ()
     (setq erc-fill-column (- (window-width) 12))))

;; Connect to IRC via `erc'.
(defun dotfiles/erc-connect ()
  "Connected to IRC via `erc'."
  (interactive)
  (erc-tls :server "irc.libera.chat"
           :port 6697
           :nick "megaphone"
           :password (password-store-get "libera.chat/megaphone")
           :full-name "Chris Hayward"))

;; Configure keybindings.
(dotfiles/leader
  "i" '(dotfiles/erc-connect :which-key "Chat"))

Dired

epkgs.dired-single

Dired Mode shows a directory listing inside of an Emacs buffer that can be used to perform various file operations on files and subdirectories. The operations you can perform are numerous, from creating subdirectories, byte-compiling files, searching, and editing files. Dired Extra provides extra functionality.

;; Include `dired-x' for the `jump' method.
(require 'dired-x)

;; Configure `dired-single' to support `evil' keys.
(evil-collection-define-key 'normal 'dired-mode-map
  "h" 'dired-single-up-directory
  "l" 'dired-single-buffer)

;; Configure keybindings for `dired'.
(dotfiles/leader
  "d" '(dired-jump :which-key "Dired"))

Icons

epkgs.all-the-icons
epkgs.all-the-icons-dired
epkgs.all-the-icons-ivy-rich

All The Icons is a utility package to collect various Icon Fonts and prioritize them within GNU/Emacs.

;; Setup `all-the-icons-dired'.
(add-hook 'dired-mode-hook 'all-the-icons-dired-mode)

;; Disable monochrome icons.
(setq all-the-icons-dired-monochrome nil)

;; Display default font ligatures.
(global-prettify-symbols-mode +1)

Emojis

epkgs.emojify

Emojify is an Emacs extension to display Emojis. It can display GitHub style Emojis like :smile: or plain ascii ones such as :). It tries to be as efficient as possible, while also providing flexibility.

;; Setup `emojify'.
(add-hook 'after-init-hook 'global-emojify-mode)

EShell

epkgs.eshell-prompt-extras

EShell is a shell-like command interpreter for GNU/Emacs implemented in Emacs Lisp. It invokes no external processes except for those requested by the user. It’s intended to be an alternative for IELM, and a full REPL envionment for Emacs.

;; Configure `eshell'.
(setq eshell-highlight-prompt nil
      eshell-prefer-lisp-functions nil)

;; Configure the lambda prompt.
(autoload 'epe-theme-lambda "eshell-prompt-extras")
(setq eshell-prompt-function 'epe-theme-lambda)

;; Configure keybindings for `eshell'.
(dotfiles/leader
  "e" '(eshell :which-key "EShell"))

VTerm

Emacs Libvterm (VTerm) is a fully-fledged terminal emulator inside GNU/Emacs based on Libvterm, a blazing fast C library used in Neovim. As a result of using compiled code (instead of Emacs Lisp), VTerm is capable, fast, and it can seamlessly handle large outputs.

epkgs.vterm

;; Add keybindings for interacting with the shell(s).
(dotfiles/leader
  "v" '(vterm :which-key "VTerm"))

Magit

Magit is an interface to the Git version control system, implemented as a GNU/Emacs package written in Emacs Lisp. It fills the glaring gap between the Git command line interface and various GUIs, letting you perform trivial as well as elaborate version control tasks within a few mnemonic key presses.

epkgs.magit

;; Add keybindings for working with `magit'.
(dotfiles/leader
  "g" '(:ignore t :which-key "Git")
  "gg" '(magit-status :which-key "Status")
  "gc" '(magit-clone :which-key "Clone")
  "gf" '(magit-fetch :which-key "Fetch")
  "gp" '(magit-pull :which-key "Pull"))

Hydra

epkgs.hydra

Hydra allows you to create keymaps for related commands, with the ability to easily repeat commands using a single keystroke.

Fonts

Iosevka is an open-source, sans-serif + slab-serif, monospace + quasi-proportional typeface family, designed for writing code, using in terminals, and preparing technical documents. Configure it as the default font face inside of Emacs and define a Hydra command for quickly scaling text.

;; Configure the font when running as `emacs-server'.
(custom-set-faces
  '(default ((t (:inherit nil :height 120 :family "Iosevka")))))

;; Define a `hydra' function for scaling the text interactively.
(defhydra hydra-text-scale (:timeout 4)
  "Scale the text in the current buffer."
  ("k" text-scale-decrease "Decrease")
  ("j" text-scale-increase "Increase")
  ("f" nil "Finished" :exit t))

;; Create keybinding for calling the function.
(dotfiles/leader
  "tf" '(hydra-text-scale/body :which-key "Font"))

Frames

Sometimes it’s useful to resize the current frame without using the mouse (always). The default behaviour when calling shrink-window and enlarge-window only changes the size by a small margin. I solved this problem with the same method used for scaling text:

;; Define a `hydra' function for resizing the current frame.
(defhydra hydra-resize-frame (:timeout 4)
  "Scale the current frame."
  ("h" shrink-window-horizontally "Left")
  ("j" enlarge-window "Down")
  ("k" shrink-window "Up")
  ("l" enlarge-window-horizontally "Right")
  ("f" nil "Finished" :exit t))

;; Add keybindings for working with frames to replace
;; the C-x <num> <num> method of bindings, which is awful.
(dotfiles/leader
  "w" '(:ignore t :which-key "Windows")
  "ww" '(window-swap-states :which-key "Swap")
  "wc" '(delete-window :which-key "Close")
  "wh" '(windmove-left :which-key "Left")
  "wj" '(windmove-down :which-key "Down")
  "wk" '(windmove-up :which-key "Up")
  "wl" '(windmove-right :which-key "Right")
  "ws" '(:ignore t :which-key "Split")
  "wsj" '(split-window-below :which-key "Below")
  "wsl" '(split-window-right :which-key "Right")
  "wr" '(hydra-resize-frame/body :which-key "Resize"))

Elfeed

epkgs.elfeed

Elfeed is an extensible web feed reader for GNU/Emacs, support both Atom and RSS. It requires Emacs 24.3+ and is available for download from the standard repositories.

;; Configure `elfeed'.
(setq elfeed-db-directory (expand-file-name "~/.cache/elfeed"))

;; Add custom feeds for `elfeed' to fetch.
(setq elfeed-feeds (quote
                     (("https://hexdsl.co.uk/rss.xml")
                      ("https://lukesmith.xyz/rss.xml")
                      ("https://friendo.monster/rss.xml")
                      ("https://chrishayward.xyz/index.xml")
                      ("https://protesilaos.com/master.xml"))))

;; Add custom keybindings for `elfeed'.
(dotfiles/leader
  "f" '(:ignore t :which-key "Elfeed")
  "fl" '(elfeed :which-key "Open")
  "fu" '(elfeed-update :which-key "Update"))

Org Mode

epkgs.org

Org Mode is a document editing and organizing mode, designed for notes, planning, and authoring within the free software text editor GNU/Emacs. The name is used to encompass plain text files (such as this one) that include simple marks to indicate levels of a hierarchy, and an editor with functions that can read the markup and manipulate the hierarchy elements.

;; Configure `org-mode' source blocks.
(setq org-src-fontify-natively t      ;; Make source blocks prettier.
      org-src-tab-acts-natively t     ;; Use TAB indents within source blocks.
      org-hide-emphasis-markers t     ;; Don't show emphasis markup.
      org-src-preserve-indentation t  ;; Stop `org-mode' from formatting blocks.
      org-confirm-babel-evaluate nil) ;; Don't ask for confirmation to evaluate blocks.

;; Add an `org-mode-hook'.
(add-hook 'org-mode-hook
  (lambda ()
    (org-indent-mode)
    (visual-line-mode)))

;; Remove the `Validate XHTML 1.0' message from HTML export.
(setq org-export-html-validation-link nil
      org-html-validation-link nil)

;; Configure the keywords in the TODO -> DONE sequence.
(setq org-todo-keywords '((sequence "TODO" "START" "WAIT" "DONE")))

;; Track ids globally.
(setq org-id-track-globally t)

;; Configure `org-babel' languages.
(org-babel-do-load-languages
  'org-babel-load-languages
  '((C . t)))

;; Log / Clock into property drawers.
(setq org-log-into-drawer t
      org-clock-into-drawer t)

;; Encrypt files with the public key.
(setq epa-file-select-keys 2
      epa-file-encrypt-to "37AB1CB72B741E478CA026D43025DCBD46F81C0F"
      epa-cache-passphrase-for-symmetric-encryption t)

;; TODO: Configure default structure templates.
;; (require 'org-tempo)

;; Don't use native image sizes in previews.
(setq org-image-actual-width nil)

;; Apply custom keybindings.
(dotfiles/leader
  "o" '(:ignore t :which-key "Org")
  "oe" '(org-export-dispatch :which-key "Export")
  "ot" '(org-babel-tangle :which-key "Tangle")
  "oi" '(org-toggle-inline-images :which-key "Images")
  "of" '(:ignore t :which-key "Footnotes")
  "ofn" '(org-footnote-normalize :which-key "Normalize"))

Org Roam

epkgs.org-roam

Org Roam is a plain-text knowledge management system. It borrows principles from the Zettelkasten method, providing a solution for non-hierarchical note-taking. It should also work as a plug-and-play solution for anyone already using Org Mode for their personal wiki.

;; Setup `org-roam'.
(require 'org-roam)

;; Silence the migration warnings.
(setq org-roam-v2-ack t)

;; Enable `visual-line-mode' in `org-roam' buffer.
(add-hook 'org-roam-mode-hook
	  (lambda ()
	    (visual-line-mode +1)))

;; Enable completion everywhere.
(setq org-roam-completion-everywhere t)

;; Set the roam directories.
(setq org-roam-directory (expand-file-name "/etc/dotfiles")
      org-roam-dailies-directory (concat org-roam-directory "/docs/daily"))

;; Clear the deafult capture templates.
(setq org-roam-capture-templates '()
      org-roam-dailies-capture-templates '())

;; Override the default slug method.
(cl-defmethod org-roam-node-slug ((node org-roam-node))
  (let ((title (org-roam-node-title node))
        (slug-trim-chars '(768 ; U+0300 COMBINING GRAVE ACCENT
                           769 ; U+0301 COMBINING ACUTE ACCENT
                           770 ; U+0302 COMBINING CIRCUMFLEX ACCENT
                           771 ; U+0303 COMBINING TILDE
                           772 ; U+0304 COMBINING MACRON
                           774 ; U+0306 COMBINING BREVE
                           775 ; U+0307 COMBINING DOT ABOVE
                           776 ; U+0308 COMBINING DIAERESIS
                           777 ; U+0309 COMBINING HOOK ABOVE
                           778 ; U+030A COMBINING RING ABOVE
                           780 ; U+030C COMBINING CARON
                           795 ; U+031B COMBINING HORN
                           803 ; U+0323 COMBINING DOT BELOW
                           804 ; U+0324 COMBINING DIAERESIS BELOW
                           805 ; U+0325 COMBINING RING BELOW
                           807 ; U+0327 COMBINING CEDILLA
                           813 ; U+032D COMBINING CIRCUMFLEX ACCENT BELOW
                           814 ; U+032E COMBINING BREVE BELOW
                           816 ; U+0330 COMBINING TILDE BELOW
                           817 ; U+0331 COMBINING MACRON BELOW
                           )))
    (cl-flet* ((nonspacing-mark-p (char)
				  (memq char slug-trim-chars))
	       (strip-nonspacing-marks (s)
				       (ucs-normalize-NFC-string
					(apply #'string (seq-remove #'nonspacing-mark-p
								    (ucs-normalize-NFD-string s)))))
	       (cl-replace (title pair)
			   (replace-regexp-in-string (car pair) (cdr pair) title)))
      (let* ((pairs `(("[^[:alnum:][:digit:]]" . "-")
		      ("--*" . "-")
		      ("^-" . "")
		      ("-$" . "")))
	     (slug (-reduce-from #'cl-replace (strip-nonspacing-marks title) pairs)))
	(downcase slug)))))

;; Configure capture templates.
;; Standard document.
(add-to-list 'org-roam-capture-templates
  '("d" "Default" plain "%?"
    :target (file+head "docs/%<%Y%m%d%H%M%S>-${slug}.org.gpg"
"
#+TITLE: ${title}
#+AUTHOR: Christopher James Hayward
#+EMAIL: chris@chrishayward.xyz
"
)
    :unnarrowed t))

;; Daily notes.
(add-to-list 'org-roam-dailies-capture-templates
  '("d" "Default" entry "* %?"
    :target (file+head "%<%Y-%m-%d>.org.gpg"
"
#+TITLE: %<%Y-%m-%d>
#+AUTHOR: Christopher James Hayward
#+EMAIL: chris@chrishayward.xyz
")))

;; Apply custom keybindings.
(dotfiles/leader
  "or"  '(:ignore t :which-key "Roam")
  "ori" '(org-roam-node-insert :which-key "Insert")
  "orf" '(org-roam-node-find :which-key "Find")
  "orc" '(org-roam-capture :which-key "Capture")
  "org" '(org-id-get-create :which-key "Get/Create")
  "orb" '(org-roam-buffer-toggle :which-key "Buffer"))

;; Apply custom keybindings for dailies.
(dotfiles/leader
  "ord" '(:ignore t :which-key "Dailies")
  "ordd" '(org-roam-dailies-goto-date :which-key "Date")
  "ordt" '(org-roam-dailies-goto-today :which-key "Today")
  "ordm" '(org-roam-dailies-goto-tomorrow :which-key "Tomorrow")
  "ordy" '(org-roam-dailies-goto-yesterday :which-key "Yesterday"))

;; Run the setup command.
(org-roam-setup)

Org Roam UI

epkgs.org-roam-ui
epkgs.websocket
epkgs.simple-httpd

Org Roam UI is a graphical frontend for exploring your Org Roam Zettelkasten. It’s meant as a successor to Org Roam Server that extends functionality of Org Roam with a web application that runs side-by-side with Emacs.

;; HACK: Set up `org-roam-ui'.
;; (add-to-list 'load-path "~/.local/source/org-roam-ui")
(load-library "org-roam-ui")

;; Configure `org-roam-ui'.
(setq org-roam-ui-follow t
      org-roam-ui-sync-theme t
      org-roam-ui-open-on-start t
      org-roam-ui-update-on-save t
      org-roam-ui-browser-function #'browse-url-firefox)

;; Configure keybindings.
(dotfiles/leader
  "oru" '(:ignore t :which-key "UI")
  "oruu" '(org-roam-ui-mode :which-key "Toggle UI")
  "orut" '(org-roam-ui-sync-theme :which-key "Sync Theme"))

Org Drill

epkgs.org-drill

Org Drill is an extension for Org Mode that uses a spaced repition algorithm to conduct interactive Drill Sessions using Org files as sources of facts to be memorized.

;; Exclude :drill: items from `org-roam'.
(setq org-roam-db-node-include-function
  (defun dotfiles/org-roam-include ()
    (not (member "drill" (org-get-tags)))))

;; Configure keybindings for `org-drill'.
(dotfiles/leader
  "od" '(:ignore t :which-key "Drill")
  "odd" '(org-drill :which-key "Drill")
  "odc" '(org-drill-cram :which-key "Cram")
  "odr" '(org-drill-resume :which-key "Resume"))

Org Agenda

The way Org Mode works, TODO items, time-stamped items, and tagged headlines can be scattered throughout a file, or even a number of files. To get an overview of open action items, or of events that are important for a particular date, this information must be collected, sorted, and displayed in an organized way.

;; Configure `org-agenda' to use the project files.
(setq org-agenda-files '("/etc/dotfiles/"
                         "/etc/dotfiles/docs/"
                         "/etc/dotfiles/docs/daily/"))

;; Include files encrypted with `gpg'.
(require 'org)
(unless (string-match-p "\\.gpg" org-agenda-file-regexp)
  (setq org-agenda-file-regexp
    (replace-regexp-in-string "\\\\\\.org" "\\\\.org\\\\(\\\\.gpg\\\\)?"
                              org-agenda-file-regexp)))

;; Open an agenda buffer with SPC o a.
(dotfiles/leader
  "oa" '(org-agenda :which-key "Agenda"))

Org Pomodoro

epkgs.org-pomodoro

Org Pomodoro adds basic support for the Pomodoro Technique in GNU/Emacs. It can be started for the task at point, or the last task time was clocked for. Each session starts a timer of 25 minutes, finishing with a break of 5 minutes. After 4 sessions, ther will be a break of 20 minutes. All values are customizable.

;; Configure `org-pomodor' with the overtime workflow.
(setq org-pomodoro-manual-break t
      org-pomodoro-keep-killed-time t)

;; Configure keybindings.
(dotfiles/leader
  "op" '(org-pomodoro :which-key "Pomodoro"))

Writegood Mode

epkgs.writegood-mode

Writegood Mode is an Emacs minor mode to aid in finding common writing problems. It highlights the text based on the following criteria:

  • Weasel Words
  • Passive Voice
  • Duplicate Words

;; Configure `writegood-mode'.
(dotfiles/leader
  "tg" '(writegood-mode :which-key "Grammar"))

Aspell

pkgs.aspell
pkgs.aspellDicts.en
pkgs.aspellDicts.en-science
pkgs.aspellDicts.en-computers

GNU Aspell is a Free and Open Source spell checker designed to replace ISpell. It can be used as a library, or an independent spell checker. Its main feature is that it does a superior job of suggesting possible replacements for mis-spelled words than any other spell checker for the English language.

;; Use `aspell' as a drop-in replacement for `ispell'.
(setq ispell-program-name "aspell"
      ispell-eextra-args '("--sug-mode=fast"))

;; Configure the built-in `flyspell-mode'.
(dotfiles/leader
  "ts" '(flyspell-mode :which-key "Spelling"))

TexLive

TeX Live is a free software distributution for the TeX typesetting system that includes major TeX-related programs, macro packages, and fonts. Since TeX Live consists of thousands of packages, to make managing it easier, NixOS replicates the organization of Tex Live into schemes and collections:

Name Derivation Comment
Full texlive.combined.scheme-full Contains every TeX Live package
Medium texlive.combined.scheme-medium Contains everything in small + more packages and languages
Small texlive.combined.scheme-small Contains everything in basic + xetex + metapost
Basic texlive.combined.scheme-basic Contains everything in the plain scheme but includes latex
Minimal texlive.combined.scheme-minimal Contains plain only

# pkgs.texlive.combined.scheme-full

Http

epkgs.ob-http

It’s possible to make HTTP requests from Org Mode buffers using ob-http, this relies on Org Babel (included with Org Mode) being present and configured properly.

;; Required to setup `ob-http'.
(org-babel-do-load-languages
  'org-babel-load-languages
  '((http . t)))

Hugo

epkgs.ox-hugo

Ox Hugo is an Org Mode exporter for Hugo compabile markdown. My dotfiles are a result of this, and are available to view here https://chrishayward.xyz/dotfiles/.

;; Configure `ox-hugo' as an `org-mode-export' backend.
(require 'ox-hugo)

;; Set up the base directory.
(setq org-hugo-base-dir (expand-file-name "/etc/dotfiles/docs"))

;; Capture templates.
;; Shared content
;; (add-to-list 'org-roam-capture-templates
;;   '("p" "Post" plain "%?"
;;     :target (file+head "docs/posts/${slug}.org.gpg"
;; "
;; ,#+TITLE: ${title}
;; ,#+AUTHOR: Christopher James Hayward
;; ,#+DATE: %<%Y-%m-%d>

;; ,#+EXPORT_FILE_NAME: ${slug}
;; ,#+OPTIONS: num:nil todo:nil tasks:nil

;; ,#+ROAM_KEY: https://chrishayward.xyz/posts/${slug}/

;; ,#+HUGO_BASE_DIR: ../
;; ,#+HUGO_AUTO_SET_LASTMOD: t
;; ,#+HUGO_SECTION: posts
;; ,#+HUGO_DRAFT: true
;; "
;; )
;;     :unnarrowed t))

Passwords

pkgs.pass

With Pass, each password lives inside of an encrypted GPG file, whose name is the title of the website or resource that requires the password. These encrypted files may be organized into meaningful folder hierarchies, compies from computer to computer, and in general, manipulated using standard command line tools.

epkgs.password-store

Configure keybindings for passwords behind SPC p:

;; Set the path to the password store.
(setq password-store-dir (expand-file-name "~/.password-store"))

;; Apply custom keybindings.
(dotfiles/leader
  "p" '(:ignore t :which-key "Passwords")
  "pp" '(password-store-copy :which-key "Copy")
  "pe" '(password-store-edit :which-key "Edit")
  "pi" '(password-store-insert :which-key "Insert")
  "pr" '(password-store-rename :which-key "Rename")
  "pg" '(password-store-generate :which-key "Generate"))

Docker

epkgs.docker
epkgs.dockerfile-mode

Manage Docker from inside of Emacs using Docker.el. This is a full docker porcelain similar to Magit, allowing complete control of a Docker system. Add syntax highlighting to Dockerfiles using dockerfile-mode from Spotify.

;; Apply custom keybindings.
(dotfiles/leader
  "n" '(:ignore t :which-key "Containers")
  "nd" '(docker :which-key "Docker"))

MU4E

pkgs.mu
pkgs.isync
(pkgs.writeShellScriptBin "mail-init" ''
  ${pkgs.mu} init --maildir="~/.cache/mail" --my-address="chris@chrishayward.xyz"
  ${pkgs.mu} index
'')
(pkgs.writeShellScriptBin "mail-sync" ''
  ${pkgs.isync}/bin/mbsync -a
'')

MU is a tool for dealing with email messages stored in the Maildir-format. Its purpose is to help quickly find the messages needed, and allows users to view messages, extract attachments, create new maildirs, and much more. It’s written in C and C++, and includes extensions for Emacs (MU4E) and guile scheme.

epkgs.mu4e-alert

MU4E is an email client for Emacs. It’s based on the mu email indexer / searcher.

  • Fully search based: no folders, only queries
  • Fully documented, with example configurations
  • User-interface optimized for speed, with quick keystrokes for common actions
  • Asynchronous; heavy actions do not block Emacs
  • Support for non-English languages
  • Support for signing and encryption
  • Address auto-completion based on existing messages
  • Extensibile with existing code and snippets

# Deploy the authinfo file.
home.file.".authinfo.gpg".source = ../config/authinfo.gpg;

# Deploy the isync configuration file.
home.file.".mbsyncrc" = {
  text = ''
    IMAPStore xyz-remote
    Host mail.chrishayward.xyz
    User chris@chrishayward.xyz
    PassCmd "pass chrishayward.xyz/chris"
    SSLType IMAPS

    MaildirStore xyz-local
    Path ~/.cache/mail/
    Inbox ~/.cache/mail/inbox
    SubFolders Verbatim

    Channel xyz
    Far :xyz-remote:
    Near :xyz-local:
    Patterns * !Archives
    Create Both
    Expunge Both
    SyncState *
  '';
};

Before using the software inside of Emacs, the maildir must be created in the local filesystem, and indexed. This is done with a single custom shell script binary mail-init which wraps the underlying mu commands. The emacs extension is shipped with the mu mail indexer. To utilize it, it must be added to the load path inside of Emacs.

;; Add the `mu4e' shipped with `mu' to the load path.
(add-to-list 'load-path "/etc/profiles/per-user/chris/share/emacs/site-lisp/mu4e/")
(require 'mu4e)

;; Confiugure `mu4e'.
(setq mu4e-maildir "~/.cache/mail"
      mu4e-update-interval (* 5 60)
      mu4e-get-mail-command "mail-sync"
      mu4e-compose-format-flowed t
      mu4e-change-filenames-when-moving t
      mu4e-compose-signature (concat "Chris Hayward\n"
                                     "chris@chrishayward.xyz"))

;; Sign all outbound email with GPG.
(add-hook 'message-send-hook 'mml-secure-message-sign-pgpmime)
(setq message-send-mail-function 'smtpmail-send-it
      mml-secure-openpgp-signers '("37AB1CB72B741E478CA026D43025DCBD46F81C0F"))

;; Setup `mu4e' accounts.
(setq mu4e-contexts
  (list
    ;; Main
    ;; chris@chrishayward.xyz
    (make-mu4e-context
      :name "Main"
      :match-func
        (lambda (msg)
          (when msg
            (string-prefix-p "/Main" (mu4e-message-field msg :maildir))))
      :vars
        '((user-full-name . "Christopher James Hayward")
          (user-mail-address . "chris@chrishayward.xyz")
          (smtpmail-smtp-server . "mail.chrishayward.xyz")
          (smtpmail-smtp-service . 587)
          (smtpmail-stream-type . starttls)))))

;; Setup `mu4e-alert'.
(setq mu4e-alert-set-default-style 'libnotify)
(mu4e-alert-enable-notifications)
(mu4e-alert-enable-mode-line-display)

;; Open the `mu4e' dashboard.
(dotfiles/leader
  "m" '(mu4e :which-key "Mail"))

Projectile

epkgs.projectile

Projectile is a project interaction library for GNU/Emacs. Its goal is to provide a nice set of features operating on a project level, without introducing external dependencies.

;; Configure the `projectile-project-search-path'.
(setq projectile-project-search-path '("~/.local/source"))
(projectile-mode +1)

LSP Mode

epkgs.lsp-mode
epkgs.lsp-ui

The Language Server Protocol (LSP) defines the protocol used between an Editor or IDE, and a language server that provides features like:

  • Auto Complete
  • Go To Defintion
  • Find All References

;; Configure `lsp-mode'.
(setq lsp-idle-delay 0.5
      lsp-prefer-flymake t)

;; Configure `lsp-ui'.
(setq lsp-ui-doc-position 'at-point
      lsp-ui-doc-delay 0.5)

;; Add custom keybindings for `lsp'.
(dotfiles/leader
  "l" '(:ignore t :which-key "LSP")
  "ll" '(lsp :which-key "LSP"))

CCLS

epkgs.ccls

Emacs CCLS is a client for CCLS, a C/C++/Objective-C language server supporting multi-million line C++ code bases, powered by libclang.

;; Configure `ccls' to work with `lsp-mode'.
(defun dotfiles/ccls-hook ()
  (require 'ccls)
  (lsp))

;; Configure `ccls' mode hooks.
(add-hook 'c-mode-hook 'dotfiles/ccls-hook)
(add-hook 'c++-mode-hook 'dotfiles/ccls-hook)
(add-hook 'objc-mode-hook 'dotfiles/ccls-hook)
(add-hook 'cuda-mode-hook 'dotfiles/ccls-hook)

Company Mode

epkgs.company

Company Mode is a text completion framework for GNU/Emacs. The name stands for Complete Anything. It uses pluggable back-ends and front-ends to retieve and display completion candidates.

;; Configure `company-mode'.
(setq company-backend 'company-capf
      lsp-completion-provider :capf)

;; Enable it globally.
(global-company-mode +1)

GDScript Mode

epkgs.gdscript-mode

https://github.com/godotengine/emacs-gdscript-mode is an Emacs package to get GDScript support and syntax highlighting. Some of its features include:

  • Syntax highlighting
  • Code folding
  • Debugger support
  • Support for scenes and script files
  • Comment wrapping
  • Indentation
  • Automatic parsing
  • Code formatting

(require 'gdscript-mode)

;; Silence lsp warnings for gdscript.
(defun lsp--gdscript-ignore-errors (original-function &rest args)
  "Ignore the error message resulting from Godot not replying to the `JSONRPC' request."
  (if (string-equal major-mode "gdscript-mode")
      (let ((json-data (nth 0 args)))
	(if (and (string= (gethash "jsonrpc" json-data "") "2.0")
		 (not (gethash "id" json-data nil))
		 (not (gethash "method" json-data nil)))
	    nil; (message "Method not found")
	  (apply original-function args)))
    (apply original-function args)))

;; Run the function around `lsp--get-message-type' to suppress warnings.
(advice-add #'lsp--get-message-type :around #'lsp--gdscript-ignore-errors)

;; Add custom keybinds.
(dotfiles/leader
  "lg" '(gdscript-hydra-show :which-key "GDScript"))

Go Mode

epkgs.go-mode

Go Mode is an Emacs major mode for editing Golang source code.

;; Configure `go-mode' to work with `lsp-mode'.
(defun dotfiles/go-hook ()
  (add-hook 'before-save-hook #'lsp-format-buffer t t)
  (add-hook 'before-save-hook #'lsp-organize-imports t t))

;; Configure a custom `before-save-hook'.
(add-hook 'go-mode-hook #'dotfiles/go-hook)

Dart Mode

epkgs.dart-mode
epkgs.lsp-dart
epkgs.hover

Emacs Dart IDE using LSP Mode to connect to Dart Analysis Server.

;; Configure `dart-mode' to work with `lsp-mode'.
(add-hook 'dart-mode-hook 'lsp)

;; Help Emacs find Flutter packages.
(setq lsp-dart-sdk-dir (getenv "$FLUTTER_SDK_DIR"))

Rustic

epkgs.rustic

Rustic is a fork of Rust Mode that integrates well with the Language Server Protocol (LSP). Include the rust shell before launching GNU/Emacs to use this!

;; Configure `rustic' with `lsp-mode'.
(setq rustic-format-on-save t
      rustic-lsp-server 'rls)

Python Mode

epkgs.pretty-mode

The built in Python Mode has a nice feature set for working with Python code in GNU/Emacs. It is complimented with the addition of a Language Server Protocol (LSP) server. These tools are included in the Development Shell for Python.

;; Configure `pretty-mode' to work with `python-mode'.
(add-hook 'python-mode-hook
  (lambda ()
    (turn-on-pretty-mode)))

Protobuf Mode

epkgs.protobuf-mode

Protobuf mode is an Emacs major mode for editing protocol buffers.

Typescript Mode

epkgs.typescript-mode

Typescript.el is a self-contained, lightweight and minimalist major-mode focused on providing basic font-lock/syntax-highlighting and indentation for Typescript syntax, without any external dependencies.

PlantUML

pkgs.plantuml

PlantUML is an open-source tool allowing users to create diagrams from a plain-text language. Besides various UML diagrams, PlantUML has support for various other software developmented related formats, as well as visualizations of JSON and YAML files.

epkgs.plantuml-mode

PlantUML Mode is a major mode for editing PlantUML sources in GNU/Emacs.

;; Configure `plantuml-mode'.
(add-to-list 'org-src-lang-modes '("plantuml" . plantuml))
(org-babel-do-load-languages 'org-babel-load-languages '((plantuml . t)))
(setq plantuml-default-exec-mode 'executable
      org-plantuml-exec-mode 'plantuml)

Swiper

epkgs.ivy
epkgs.counsel
epkgs.ivy-rich
epkgs.ivy-posframe
epkgs.ivy-prescient

Ivy (Swiper) is a generic completion mechanism for GNU/Emacs. While operating similarily to other completion schemes like icomplete-mode, it aims to be more efficient, smaller, simpler, and smoother to use, while remaining highly customizable.

;; Configure `ivy'.
(setq counsel-linux-app-format-function
  #'counsel-linux-app-format-function-name-only)
(ivy-mode +1)
(counsel-mode +1)

;; Configure `ivy-rich'.
(ivy-rich-mode +1)

;; Configure `ivy-posframe'.
(setq ivy-posframe-parameters '((parent-frame nil))
      ivy-posframe-display-functions-alist '((t . ivy-posframe-display)))
(ivy-posframe-mode +1)

;; Configure `ivy-prescient'.
(setq ivy-prescient-enable-filtering nil)
(ivy-prescient-mode +1)

Transparency

It’s possible to control the frame opacity in GNU/Emacs. Unlike other transparency hacks, it’s not merely showing the desktop background image, but is true transparency – you can see other windows behind the Emacs window.

;; Configure the default frame transparency.
(set-frame-parameter (selected-frame) 'alpha '(95 . 95))
(add-to-list 'default-frame-alist '(alpha . (95 . 95)))

Desktop Environment

pkgs.brightnessctl

The Desktop Environment package provides commands and a global minor mode for controlling your GNU/Linux desktop from within GNU/Emacs.

epkgs.desktop-environment

You can control the brightness, volume, take screenshots, and lock / unlock the screen. The package depends on the availability of shell commands to do the heavy lifting. They can be changed by customizing the appropriate variables.

;; Configure `desktop-environment'.
(require 'desktop-environment)
(desktop-environment-mode +1)

Doom Themes

epkgs.doom-themes

Doom Themes is a theme megapack for GNU/Emacs, inspired by community favourites.

;; Include modern themes from `doom-themes'.
(setq doom-themes-enable-bold t
      doom-themes-enable-italic t)

;; Load the `doom-nord' and `doom-nord-light' themes.
;; (load-theme 'doom-nord-light t)
(load-theme 'doom-nord t)

;; Define a method for returning information about the current theme.
;; This is based off the function `org-roam-ui-get-theme'.
(defun dotfiles/theme ()
  "Return information about the current theme."
  (list `(bg . ,(face-background hl-line-face))
        `(bg-alt . ,(face-background 'default))
        `(fg . ,(face-foreground 'default))
        `(fg-alt . ,(face-foreground font-lock-comment-face))
        `(red . ,(face-foreground 'error))
        `(orange . ,(face-foreground 'warning))
        `(yellow . ,(face-foreground font-lock-builtin-face))
        `(green . ,(face-foreground 'success))
        `(cyan . ,(face-foreground font-lock-constant-face))
        `(blue . ,(face-foreground font-lock-keyword-face))
        `(violet . ,(face-foreground font-lock-constant-face))
        `(magenta . ,(face-foreground font-lock-preprocessor-face))))

;; Load a new theme with <SPC> t t.
(dotfiles/leader
  "tt" '(counsel-load-theme :which-key "Theme"))

Create a shell command that returns a JSON string of the current theme in the following format:

{
  "bg": "#272C36",
  "bg-alt": "#2E3440",
  "fg": "#ECEFF4",
  "fg-alt": "#6f7787",
  "red": "#BF616A",
  "orange": "#EBCB8B",
  "yellow": "#81A1C1",
  "green": "#A3BE8C",
  "cyan": "#81A1C1",
  "blue": "#81A1C1",
  "violet": "#81A1C1",
  "magenta": "#81A1C1"
}

(pkgs.writeShellScriptBin "dotfiles-theme" ''
  ${myEmacs}/bin/emacsclient --no-wait --eval '(json-encode (dotfiles/theme))' | sed "s/\\\\//g" | sed -e 's/^"//' -e 's/"$//'
'')

Doom Modeline

epkgs.doom-modeline

Doom Modeline is a fancy and fast modeline inspired by minimalism design. It’s integrated into Centaur Emacs, Doom Emacs, and Spacemacs.

;; Configure `doom-modeline'.
(require 'doom-modeline)
(setq doom-modeline-height 16
      doom-modeline-icon t)

;; Launch after initialization.
(add-hook 'after-init-hook 'doom-modeline-mode)

;; Define a modeline segment to show the workspace information.
(doom-modeline-def-segment dotfiles/workspaces
  (exwm-workspace--update-switch-history)
  (concat
   (doom-modeline-spc)
   (elt (let* ((num (exwm-workspace--count))
               (sequence (number-sequence 0 (1- num)))
               (not-empty (make-vector num nil)))
	  (dolist (i exwm--id-buffer-alist)
            (with-current-buffer (cdr i)
              (when exwm--frame
		(setf (aref not-empty
                            (exwm-workspace--position exwm--frame))
                      t))))
	  (mapcar
           (lambda (i)
             (mapconcat
              (lambda (j)
		(format (if (= i j) "[%s]" " %s ")
			(propertize
			 (apply exwm-workspace-index-map (list j))
			 'face
			 (cond ((frame-parameter (elt exwm-workspace--list j)
						 'exwm-urgency)
				'(:inherit warning :weight bold))
                               ((= i j) '(:inherit underline :weight bold))
                               ((aref not-empty j) '(:inherit success :weight bold))
                               (t `((:foreground ,(face-foreground 'mode-line-inactive))))))))
              sequence ""))
           sequence))
	(exwm-workspace--position (selected-frame)))))

;; Define a custom modeline to override the default.
(doom-modeline-def-modeline 'dotfiles/modeline
  '(bar workspace-name dotfiles/workspaces window-number modals matches buffer-info remote-host buffer-position word-count parrot selection-info)
  '(objed-state misc-info persp-name battery grip irc mu4e gnus github debug repl lsp minor-modes input-method indent-info buffer-encoding major-mode process vcs checker))

;; Define a method to load the modeline.
(defun dotfiles/load-modeline ()
  "Load the default modeline."
  (doom-modeline-set-modeline 'dotfiles/modeline 'default))

;; Enable `doom-modeline'.
(add-hook 'doom-modeline-mode-hook 'dotfiles/load-modeline)
(doom-modeline-mode +1)
(doom-modeline-set-modeline 'dotfiles/modeline 'default)

Website Configuration

My personal website is a static HTML page written with Hugo, and is fully integrated into this configuration. It uses the config.toml, config.yaml, or config.json file (found in the sites root directory) as the default site config. Working with this requires the module to be enabled.

# This file is controlled by /etc/dotfiles/README.org
title                  = "Chris Hayward"
copyright              = "Licensed under Attribution 4.0 International (CC BY 4.0)"
baseURL                = "https://chrishayward.xyz/"
theme                  = "hello-friend-ng"
languageCode           = "en-us"
defaultContentLanguage = "en"
pygmentsCodefences     = true
pygmentsUseClasses     = false
pygmentsStyle          = "dracula"

[params]
  dateform          = "Jan 2, 2006"
  dateformShort     = "Jan 2"
  dateformNum       = "2006-01-02"
  dateformNumTime   = "2006-01-02 15:04 -0700"
  authorName        = "Christopher James Hayward"
  homeSubtitle      = "Airplanes, Linux, and Metalcore"
  footerCopyright   = ' &#183; <a href="http://creativecommons.org/licenses/by/4.0/" target="_blank" rel="noopener">CC BY 4.0</a>'
  enableThemeToggle = true

  [[params.social]]
    name = "paypal"
    url  = "https://paypal.me/chrishaywardxyz"

  [[params.social]]
    name = "github"
    url  = "https://github.com/chayward1/"

  [[params.social]]
    name = "gitlab"
    url  = "https://gitlab.com/chayward1/"

  [[params.social]]
    name = "email"
    url  = "mailto:chris@chrishayward.xyz"
[privacy]
  [privacy.disqus]
    disable = true

  [privacy.googleAnalytics]
    disable = true

  [privacy.instagram]
    disable = true

  [privacy.twitter]
    disable = true

  [privacy.vimeo]
    disable = true

  [privacy.youtube]
    disable = true
[menu]
  [[menu.main]]
    identifier = "cloud"
    name       = "Cloud"
    url        = "https://cloud.chrishayward.xyz"
  [[menu.main]]
    identifier = "dotfiles"
    name       = "Dotfiles"
    url        = "/dotfiles"
  [[menu.main]]
    identifier = "projects"
    name       = "Projects"
    url        = "https://git.chrishayward.xyz"

Params

Dates are important in Hugo, and they configure how dates are assigned and displayed in your content pages. Themes are also able to extract information from the configuration to display, including social media icons, subtitles, and footer sections.

[params]
  dateform          = "Jan 2, 2006"
  dateformShort     = "Jan 2"
  dateformNum       = "2006-01-02"
  dateformNumTime   = "2006-01-02 15:04 -0700"
  authorName        = "Christopher James Hayward"
  homeSubtitle      = "Airplanes, Linux, and Metalcore"
  footerCopyright   = ' &#183; <a href="http://creativecommons.org/licenses/by/4.0/" target="_blank" rel="noopener">CC BY 4.0</a>'
  enableThemeToggle = true

  [[params.social]]
    name = "paypal"
    url  = "https://paypal.me/chrishaywardxyz"

  [[params.social]]
    name = "github"
    url  = "https://github.com/chayward1/"

  [[params.social]]
    name = "gitlab"
    url  = "https://gitlab.com/chayward1/"

  [[params.social]]
    name = "email"
    url  = "mailto:chris@chrishayward.xyz"

Privacy

I do not use any analytics or tracking in my website. Depending on the theme selected, some of these features may be enabled. I opt to override those settings here to make sure no unwanted trackers are loaded.

[privacy]
  [privacy.disqus]
    disable = true

  [privacy.googleAnalytics]
    disable = true

  [privacy.instagram]
    disable = true

  [privacy.twitter]
    disable = true

  [privacy.vimeo]
    disable = true

  [privacy.youtube]
    disable = true

Layout

Individual pages can be configured here to define the layout of the page. This is where quick links can be configured, and other sections such as blog posts, an about section, or a contact page can be added.

[menu]
  [[menu.main]]
    identifier = "cloud"
    name       = "Cloud"
    url        = "https://cloud.chrishayward.xyz"
  [[menu.main]]
    identifier = "dotfiles"
    name       = "Dotfiles"
    url        = "/dotfiles"
  [[menu.main]]
    identifier = "projects"
    name       = "Projects"
    url        = "https://git.chrishayward.xyz"